PHDVH57GH0BB General Electric Dryer - Parts

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

This felt attaches to the top bearing.

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.

This igniter helps start the burner in your gas dryer, allowing it to produce heat for drying clothes. It’s a reliable replacement for fixing heating issues and restoring proper dryer performance. Eas...

This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valv...

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...

This part is located on the housing for the heating element.

This durable fastening nut secures internal components such as panels, brackets, or control housings. When worn or missing, the appliance may rattle, vibrate, or shift out of alignment. Replacing the ...

Help your dryer perform at its best with this replacement lint filter, designed to catch loose lint and keep air flowing freely. Measuring roughly 13½ inches wide and 6 inches long, it features a whit...

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This dryer door strike plate helps secure the door in the closed position by properly engaging with the door latch during operation. Designed for reliable alignment and durability, it is commonly repl...