DSXH43EF0WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Linda from Coralville, IA
- Parts Used:
- WE01X10082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
our dryer timer knob had a crack in it and I couldn't turn on the dryer
The repair was as easy as popping on a new knob. The order came in 24 hours and the illustration of the appliance made it simple to know what part number to order. I would highly recommend this site to friends and family.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- barbara from Tequesta, FL
- Parts Used:
- WE01X10083
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic on/off knob cracked about a year ago.
Never got around to replacing. Found your website...ordered part....arrived the next day...popped it on the dryer. Done. Easiest installation and solution ever. HIGHLY RECOMMEND this website.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- frederick W from wall, NJ
- Parts Used:
- WE25X10001
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
Broken shaft in rear bearing
Take the top off and front off and disconnect the belt and lift the drum out and there it is . Easy and alot cheaper then new dryer and works like new .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jimmie from Surprise, AZ
- Parts Used:
- 7C7
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bulb burned out.
Screwed new bulb in socket
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from HAZELHURST, WI
- Parts Used:
- 7C7
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The light bulb in my freezer door burned out.
Remove the burned out bulb and install the new light bulb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margaret Sanchez from Sacramento, CA
- Parts Used:
- WE01X10082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob suddenly stopped working on a Saturday afternoon
Part was ordered on Saturday. It arrived on Tuesday. Required no tools. Just slipped the timer knob onto the shaft and pushed it in. Dryer timer works again. Thanks for the fast service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephanie from DENVER, CO
- Parts Used:
- 7C7
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
drum light burned out
removed the bulb from the package unscrewed the old bulb & screwed in the new bulb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alonso from MONTGOMRY VLG, MD
- Parts Used:
- WE12X10009, WE13X10011
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Rear bearing was broke
I like to fix , i have time and i just give me the chance to try , and i did it , i wish to pay less for the parts , but was a good feeling when the problem fixed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gene from LaGrange, GA
- Parts Used:
- WE25X10001
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Back Drum Bearing Worn Out
It took about 20 minutes, first I popped the top off using a flat screwdriver in my leatherman and removed the wires on the door switch then two screws holding the front on, and then I removed the drum which took a little longer because the belt tensioner was difficult to release because of limited space. Removed old bearing (ball and socket) and replaced with new one. I then reassembled in reverse order. Working great. . .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary C from St. Paul, MN
- Parts Used:
- WE01X10082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob on the front of the dryer had cracked
Took cracked timer knob off and replaced it with the new one. All I had to do was put the knob on. No tools required. Took less than one minute. =)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nigel from Stillwater, OK
- Parts Used:
- WE01X10082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The core of the dryer knob breaks and then fails to turn the dial to select dryer options.
It is easy, remove the old knob - it virtually falls off - and slide on the new one. Wait a year and buy a new one as the failure will have repeated - there is a design flaw with this assembly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Wanaque, NJ
- Parts Used:
- WE01X10082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Clothes dryer timer knob was cracked
removed and replaced, no tools required
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Embden, ME
- Parts Used:
- WE01X10082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken timer knob
Slide on to shaft
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- NICOLAS from LYNN, MA
- Parts Used:
- WE3X70
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
Dryer making squeeky noise.
Removed the Drum and replaced the part....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Spencer from Chicago, IL
- Parts Used:
- WE25X10001
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Stackable washer & dryer
Scared to do the work myself found this website which gave me basic instructions and access to parts needed. Ordered and made an error called and CS took care of me right away. Fast friendly and will buy from them again. Great service great parts and great people!
Was this instruction helpful to you?
Thank you for voting!