Models > DWXR485GB0CC > Instructions

DWXR485GB0CC General Electric Dryer - Instructions

Jump to:

All Instructions for the DWXR485GB0CC

Customer:: Earl from Aiken, SC
Parts Used:: WE4M406
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Replacement part had a different configuration

I simply removed the switch and matched the pole numbers to the new switch eventhough the new switch had two extra poles. The switch replacement was straightforward and worked very well.

5 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Sid from Lake park, GA
Parts Used:: WE03X37317, WE03X37318
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Dryer making grinding noise

Googled possible problem where noise was coming from. Went to Parts Select web site. Ordered felt and drum bracket. Removed screws behind control knobs and removed top of dryer. Removed two screws on front inside dryer (left/right side) this allowed me to remove front panel of dryer. Unattached wires. Drum bracket is located above door opening...pretty much snaps out, felt piece is located on bottom bracket. Felt piece was replaced and new top bracket replaced. Reattach wires, lift drum slightly to fit doo iInto place. Dryer still made noise. Noticed I did not have any drum slides! Drum slides slide into top of front bracket at 10/2 o'clock position and 11/1o'clock. Easy and very inexpensive dryer repair!! My husband was very impressed that I could take dryer apart and fix!!!

Was this instruction helpful to you?

Customer:: Scott from Pascagoula, MS
Parts Used:: WE05X20431
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replace light bulb in drum.

Unplug dryer, unscrew bulb then replace with a new bulb. Plug dryer back in.

Was this instruction helpful to you?

Customer:: Joanie from Barlow, KY
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken start knob on dryer

old dryer knob had lost its spring and would not turn on. simply pulled old knob off and replaced by pushing new knob onto shaft. voila! saved myself a service call.

Was this instruction helpful to you?

Customer:: Larry from Wilmington, NC
Parts Used:: WE03X37318
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

High Pitch Sqeaking durng dryer operation

Replaced drum bearing part and white slides.The problem was that it was not the drum slide support. It appears to be the the drum rear bearing of whch I am now ordering. The bearing replacement is a little more difficult, but I have taken this on as a challenge

Was this instruction helpful to you?

Customer:: RAMCHANDAR from BRISTOW, VA
Parts Used:: WE03X37318
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

noisey

TOO EASY to repair. WORKS GREAT>

Was this instruction helpful to you?

Customer:: Joseph from Middletown, NJ
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken Dryer Knob

Removed and replaced knob.

Was this instruction helpful to you?

Customer:: Shauna from Bend, OR
Parts Used:: WE03X37318
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

High Squeaking noise

I removed the top of the dryer and saw that the top two drum slides where gone and the drum bearing itself was damaged I Temporally placed the parts on the drum bearing until I got the new one, that stopped the squeaking noise. All I needed to do was place the part with the hole on the little hook and then sled the other part in its slot.

Was this instruction helpful to you?

Customer:: David from Gig Harbor, WA
Parts Used:: WE01X20580
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old door handle broke off

Inserted replacement door handle into two slots on door and snapped into place. Amazingly easy and a perfect fit!

Was this instruction helpful to you?

Customer:: Daniel from Maryville, TN
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Broken knob

Used pliers to remove old clip. Installed new clip and knob. Very easy.

Was this instruction helpful to you?

Customer:: Ken from Valdosta, GA
Parts Used:: WH01X10060
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

The old knob hasd split and wouldn't turn the dryer on

I took the visegrip pliers off the d shaft and simply slid the new knob on with ease. I never doubted my abilities!

Was this instruction helpful to you?

Customer:: Dana M from Middleport, NY
Parts Used:: WE03X37317
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Intermittent Squeek Noise

Removed 2 screws from inside door lifted top panel up,removed 1 screw attaching front panel to left side. Pulled front panel out far enough to remove and replace slider bearing.

Was this instruction helpful to you?

Customer:: jeffrey from hertford, NC
Parts Used:: WE03X37318
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Loud Squealling noise from dryer

Opened the door and removed 2 screws from inside/top of door. Removed top and then removed 2 screws from back of front panel. Lifted drum slightly to remove front panel and attached new slides.

Was this instruction helpful to you?

Customer:: Erin from Tucson, AZ
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken knob

The old knob broke off & was no longer able to turn the pin to start the dryer. I simply slid the new knob onto the pin & it worked like new.

Was this instruction helpful to you?

Customer:: Tom from Hatley, WI
Parts Used:: WE01X20580
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Dryer handle cracked

Pulled on the two ends towards the outside edge and it popped right off. snapped the new on.The new one is stronger and Partselect shipped it to my door in 3 days.Thanks

Was this instruction helpful to you?

All Instructions for the DWXR485GB0CC