DBB3300GA2WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Adrienne from Beaver, PA
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Start knob broke from being turned too far
Fortunately I watched the video on how to change the knob. I may not have noticed that the metal clip part of the old knob was still attached. Once the old part was removed, the new knob slid right into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- leah from Ocala, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob cracked and dryer wouldn't start
Doesn't get any easier. Lined up the D shape on dryer and timer knob and just popped it in. Working great. I wanted to comment on the super fast shipping. I have never had anything ordered and delivered to my home so fast. It took less than 24 hours to get to my door from the time I ordered it and we chose just the regular ground shipping. Amazing!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Elko, NV
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer timer knob had cracked and when turning the knob it would not rotate to setting desired
I went online and ordered the part number WE1M654 and it came within 2 days and just pulled the old knob off and inserted the new knob and it worked.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sandy from sugarcreek, OH
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dryer knob would not advance
took the knob out of the bag and snapped it into place...all done!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Ledbetter, KY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Handle spins on switch shaft
Took new knob out of bag,slid new knob on. Worked great
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Emily from Missouri City, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
unable to set the dryer timer
I matched the flat part of the knob to the dryer part and pushed into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sherrilan from North Charleston, SC
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
No problem at all.
I did as the video instruction showed me. I used the pliers and with one pull the metal piece came off and I just put the new knob on it did not take a minute.It was so easy. I am so happy to know that I can get my parts at a great price and do it myself. I have a service plan through my electric company that I pay a fee monthly and if I need services for any appliances there is an additional $25.00 for services and that does not include the part needed to fix my dryer. I ordered my own part with shipping and handling and it still came out less than $25 with no additional fee. I am very satisfied that I now can order parts and do it myself. Thank you PartSelet.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Austin, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic timer knob broke and spun around freely
I grabbed the broken knob firmly and pulled it straight off. I took the new knob and pressed it firmly into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Erin from Tucson, AZ
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob
The old knob broke off & was no longer able to turn the pin to start the dryer. I simply slid the new knob onto the pin & it worked like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sara from Destin, FL
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The knob broke
Took the knob and clip off the dryer and stuck the knew knob on!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BIll from Vero Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer knob would not turn as plastic was broken.
Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ezequiel from Las Vegas, NV
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked timer knob
I had found out that reason the timer knob cracked was because the timer switch was turning very tight and caused the knob to crack and realized that dryer also needed a timer switched witch I also ordered from you. I really like how very helpful parts select is with the instructions you send along with the parts I ordered witch will save alot of time. Thanks For your help Ezequiel Escamilla
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carolyn from sherman, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the knob was cracked and the dryer would stay on settings..
pulled the old kob off and examined it and replaced it with the one i ordered...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Ulysses, KS
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer would not start
We thought the timer was out on the dryer so I was looking for a new timer when I came across a video on your site about replacing a broken timer knob, so I decided to check the knob first and sure enough it was cracked. This video saved me a lot of time and money. Shipment was quick. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from spokane valley, WA
- Parts Used:
- WE03X37318
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers, Socket set
grinding noise -- sudden onset
I followed the varied instructions out there for getting the dryer open. WATCH the videos on uTube; I took out more screws than needed on first attempt -- which isn't a big deal but took me longer than it should have to pull it apart. It appeared the grinding was coming from the dryer bearings due to some abrasion I could see and worn front slides, so I replaced the front slides (4) and the rear bearing. The kids helped by crawling inside the drum to tighten the new bearing bolts (just for fun). When I put it back together it was making a somewhat different grinding noise. It wouldn't make any noise until I put the belt AND front cover on and then it would make a periodic (about every 10 degrees) grind when I rotated the drum; I took it apart and the grinding would stop even if I rotated the blower by hand. Put it together, the grind would start .... It took me awhile to figure out that the blower retaining bolt had come loose so the plastic blower was grinding on the metal cover. CHECK THE BLOWER RETAINING BOLT visible from the front with the dryer door/cover off -- it's not obvious that it's loose by looking at it since the retaining clip still sits over the blower shaft even when it's loose. You might even see small nicks in the blower fan blade. It's super quiet now.
Was this instruction helpful to you?
Thank you for voting!