DBB3300GA2WW General Electric Dryer - Instructions

i first popped off the top of te dryer after removing the two screws in frotn when you open the door. I then removed the two screws holding the front together. after tilting the front out i was able to place the slides in without having to pull of the front entirely.

pulled off the top, pulled off the front then replaced the plastic that was supporting the front side of the drum. fairly easy to replace although the little plastic 'slides' (you need 4 of them)

took off top of dryer, took out 2 screws so front of dryer could be removed, replaced bearing,slides and felt seal

snap in snap out

Initially purchased just the plastic slides, but when I opened the dryer I found the top drum bearing was smashed and the plastic was basically gone in a whole section, so I then ended up ordering the bearing as well. If you hear the loud squeaking, just buy the top drum bearing and the 4 slides (two white and two dark green). It is an easy repair and the squeaking sound is gone.

We removed the top of the the dryer and then removed the front part. Then put the traps in place, put the other parts of the dryer back on, and turned the dryer back on. Just as simple as that. No extra fees.

I ordered and replaced the front and rear bearings, including the slides that go on the front bearing. Most of this was un-necessary; replacing the slides would have been sufficient, and much easier to do. Two of the old slides were worn completely away.

I ordered to timer knob. Its was delievered in two days. When I received it, My bother and I looked at it expecting more than what we received, We said to each other this isn't going to work. I told my bother to go on and try it anyway. He took the old timer knob off and then removed a clamp at the base of the timer knob fitting. He then placed the timer knob back of the fitting. Turned the dryer on and it started right up. We were both shocked that it ran and that it was so easy to fix. Thank you PartSelect. Great customer service. I have already ordered a part for his refrigerator! Can't wait till we get the part. I'm sure its going to work just fine.

My husband snapped the new know easily into place.

I was tired of the process after having the know break three times in less than three years which makes me think there is a design flaw.

We ordered a timer knob from partselect.com and within 24 hours received our new, better, stronger time knob in the mail. We were very impressed with the customer service of this company and will definitely recommend to friends.

opened the package when the part came,(the selection knob) stuck it in the timer hole and turned the dryer on...took less than 15 seconds.

Finding the part number on the site was very easy. Replacement came in a few days. Replacement was very easy. The only thing that might have been tricky was knowing to remove the old metal insert. That issue was covered in the helpful video making this a "no brainer".

I checked the part number on the knob. Found the 1-800 number on a label in the door of the dryer. Called the number and easily ordered the part. The customer service associate that answered my call said it would be here in 3-5 budiness days. To my surprise, it was on my doorstep the next day. I simply placed it where it needed to go and wah-la!! I had a working knob again. My phone call to parts service went very smoothly and delivery was extra speedy!! Very satisfied.

I took the visegrip pliers off the d shaft and simply slid the new knob on with ease. I never doubted my abilities!

It took less than 1 min.Thanks great part.