DWSR485EA1WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- RAMCHANDAR from BRISTOW, VA
- Parts Used:
- WE03X37318
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
noisey
TOO EASY to repair. WORKS GREAT>
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Mansfield, MA
- Parts Used:
- WE11M23
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
dryer was not heating up
Had to remove the drum to get at the heater element also had to swop the sensers to the new element
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Wilmington, NC
- Parts Used:
- WE03X37318
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
High Pitch Sqeaking durng dryer operation
Replaced drum bearing part and white slides.The problem was that it was not the drum slide support. It appears to be the the drum rear bearing of whch I am now ordering. The bearing replacement is a little more difficult, but I have taken this on as a challenge
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- leah from Ocala, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob cracked and dryer wouldn't start
Doesn't get any easier. Lined up the D shape on dryer and timer knob and just popped it in. Working great. I wanted to comment on the super fast shipping. I have never had anything ordered and delivered to my home so fast. It took less than 24 hours to get to my door from the time I ordered it and we chose just the regular ground shipping. Amazing!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sara from Destin, FL
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The knob broke
Took the knob and clip off the dryer and stuck the knew knob on!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- charles from haledon, NJ
- Parts Used:
- WE03X37318
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
loud squeak coming from dryer
remove front and top cannover's from dryer.remove plastic inside bearing housing and plastic bearing slides replace worn out bearing slides with new ones. needed 4 bearings direction suggested only two....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rick from Naperville, IL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob Was Broken
Replaced by hand. Took 5 seconds to repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken from Valdosta, GA
- Parts Used:
- WH01X10060
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The old knob hasd split and wouldn't turn the dryer on
I took the visegrip pliers off the d shaft and simply slid the new knob on with ease. I never doubted my abilities!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chrystelle from Laguna Hills, CA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob on our dryer broke off because of flimsy plastic
We ordered a timer knob from partselect.com and within 24 hours received our new, better, stronger time knob in the mail. We were very impressed with the customer service of this company and will definitely recommend to friends.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from Katy, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer would not come on because of a crack in the timer knob
opened the package when the part came,(the selection knob) stuck it in the timer hole and turned the dryer on...took less than 15 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JEFFREY from PERRYSBURG, OH
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
On-Off knob on dryer broke.
Finding the part number on the site was very easy. Replacement came in a few days. Replacement was very easy. The only thing that might have been tricky was knowing to remove the old metal insert. That issue was covered in the helpful video making this a "no brainer".
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Williamstown, NJ
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the timer knob on my dryer broke...
I checked the part number on the knob. Found the 1-800 number on a label in the door of the dryer. Called the number and easily ordered the part. The customer service associate that answered my call said it would be here in 3-5 budiness days. To my surprise, it was on my doorstep the next day. I simply placed it where it needed to go and wah-la!! I had a working knob again. My phone call to parts service went very smoothly and delivery was extra speedy!! Very satisfied.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maria from Rosedale, MD
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The timer knob cracked
I just had to replace the timer knob after the original cracked after turning it and it cracked. The part arrived the next day even with standard shipping.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Iola from Apollo Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turned Timer Knob and drier didn't start
Turning the timer on the drier, it felt smooth - no clicking. Rotated to the setting and turned the Start knob - nothing. Pulled the Timer knob off by hand and noticed splits down both sides of the knob. ordered a new knob, pushed it - back in business. Partselect was quick about getting me the replacement part. Thanks
Was this instruction helpful to you?
Thank you for voting!