Models > DPSQ475GT6WW > Instructions

DPSQ475GT6WW General Electric Dryer - Instructions

Jump to:

All Instructions for the DPSQ475GT6WW
16 - 30 of 60
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Cheryl from Inwood, WV
Parts Used:
WE03X37318
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Making noise while drum was turning.
Removed 2 screws to remove top. Removed 2 other screws to remove front. Removed old parts. Installed new parts. Reassemble all afetr cleaning duct work out.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
starla from Fort Cambell, KY
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Knob was broken off ordered a new knob.
First the old knob was broken just pulled it off. made sure the metal piece was clean of all debris or junk and slide the new know on turned it to make sure it was snug and was ready to go. to easy
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
krisy from anniston, AL
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer timer knob would not work
Easy! Just took the broken knob and metal ring off, and put on the new knob. took less that one minute. Works like a charm now. No service call cost either!!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Andover, NJ
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob had cracked inside
Just pulled off the old knob and pushed the new one onto the switch. Done in 1 minute.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leroy from Charleston, SC
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
dryer would not start
removed timer knob and replaced with new item
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tracy from Cassadaga, NY
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The timer knob cracked and was no longer good to use.
We just put on the replacement knob and everything is GREAT!! Thanks!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BARBARA from RAINIER, WA
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob was broken and would no longer turn.
Actually, my 18 year old son opened package and placed knob on dryer. Absolutely no problems In fact, company shipped quickly and accurately' very impressed with how easy this repair was.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Sacramento, CA
Parts Used:
WE03X37318
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dryer drum squealling
I followed the directions from the previous post. It was much easier than described. I got the part, removed 4 screws, removed the top, pulled the front and replaced the part. It was all together again in 15 minutes. Dryer sounds great again! I'm so glad I didn't call a repair man!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wayne from Fort Washington, PA
Parts Used:
WE03X37318
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Squeeky Noise When Dryer Was Running
First I removed the 2 screws that hold the lid down. Then I pulled the lid off. Then I removed the 2 screws that hold the front of the dryer in place. Then I lifted the drum a little and pulled the front cabinet out a little so I could see the drum slides. I removed the bad drum slides and installed the new ones. I then put everything back together and turned on the dryer. The squeeky noise was gone.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leslie from Spring, TX
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob broke; ordered replacement.
I don't think this requires an explanation.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Dallas, TX
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer's timer knob broke on the inside
When I got the knob in the mail, I opened up the package, made sure the knob was identical to the broken one and pressed the new knob into place. I needed no tools to put the new knob on. It was easier than I thought.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jo from Phoenix, AZ
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Since I have replaced the knob twice, I decided to purchase more knobs.
The website is so user friendly, I ordered additional parts I did not need at the moment.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia A from Ewing, NJ
Parts Used:
WE1X1263
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer would not start
I called the repair man for an evaluation. Upon examing the dryer, he termined that the dryer was broken from the inside. So, he advised me to order another timer knob.

That's it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Big Rapids, MI
Parts Used:
WE03X37318
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
bearing and slides worn out
took off top of dryer, took out 2 screws so front of dryer could be removed, replaced bearing,slides and felt seal
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rich from Redondo Beach, CA
Parts Used:
WE03X37318
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
drum wore down plastic
pulled off the top, pulled off the front then replaced the plastic that was supporting the front side of the drum. fairly easy to replace although the little plastic 'slides' (you need 4 of them)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DPSQ475GT6WW
16 - 30 of 60