DPSR465EA1WW General Electric Dryer - Instructions

pulled off the top, pulled off the front then replaced the plastic that was supporting the front side of the drum. fairly easy to replace although the little plastic 'slides' (you need 4 of them)

Repair was VERY easy - 4 screws total! Used google to find a video online that showed the steps.

r/r parts unit runs great

i first popped off the top of te dryer after removing the two screws in frotn when you open the door. I then removed the two screws holding the front together. after tilting the front out i was able to place the slides in without having to pull of the front entirely.

We removed the top of the the dryer and then removed the front part. Then put the traps in place, put the other parts of the dryer back on, and turned the dryer back on. Just as simple as that. No extra fees.

I ordered and replaced the front and rear bearings, including the slides that go on the front bearing. Most of this was un-necessary; replacing the slides would have been sufficient, and much easier to do. Two of the old slides were worn completely away.

I ordered to timer knob. Its was delievered in two days. When I received it, My bother and I looked at it expecting more than what we received, We said to each other this isn't going to work. I told my bother to go on and try it anyway. He took the old timer knob off and then removed a clamp at the base of the timer knob fitting. He then placed the timer knob back of the fitting. Turned the dryer on and it started right up. We were both shocked that it ran and that it was so easy to fix. Thank you PartSelect. Great customer service. I have already ordered a part for his refrigerator! Can't wait till we get the part. I'm sure its going to work just fine.

My husband snapped the new know easily into place.

I was tired of the process after having the know break three times in less than three years which makes me think there is a design flaw.

I took the visegrip pliers off the d shaft and simply slid the new knob on with ease. I never doubted my abilities!

Replace the knob with new one

Opened the door and removed 2 screws from inside/top of door. Removed top and then removed 2 screws from back of front panel. Lifted drum slightly to remove front panel and attached new slides.

replaced the knob, and the dryer worked.

At first i tried to repair the old knob before ordering one with tape and glue.kind of a mans thing you know and needless to say that didn't work so for a little while the man thing was we would adjust a crescent wrench to fit the shape of the shaft to set our time on the dryer. i looked all over our home depot stores and lowes here in town and no one carried the part. my wife Angela decided to look on line and see if anyone carried a part like this. thanks to you guys we were able to order the part and it came in and while i was at work my wife called me and said the dryer is fixed. she just fit the new knob on the shaft and it works like new. thank you part select you made my wife happy.

I saw the video and it was just as it was shown!! although there was one gliche....I didn't need pliers!!!It came soooo fast thx PartSelect!!

old dryer knob had lost its spring and would not turn on. simply pulled old knob off and replaced by pushing new knob onto shaft. voila! saved myself a service call.