DPSR405GA1WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Barbara from Haverhill, NH
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob had cracked
Ordered new timer knob on a Monday morning and Tuesday morning I received it! Very fast service!! I just had to place the new timer knob into its place by pushing it on with my hand.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ricky from vero beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
stripped knob
I saw the video and it was just as it was shown!! although there was one gliche....I didn't need pliers!!!It came soooo fast thx PartSelect!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DALE from VANCOUVER, WA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the knob turned but the dryer didn't work
replaced the knob, and the dryer worked.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Converse, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The timer knob on my dryer broke
I didn't have a part number and went online and matched the part to the picture. It came the next day by FedEx and it took less than 5 minutes to replace the old part with the new part. Really simple and easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anna from Des Moines, IA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dial knob on dryer was cracked.
First of all when I ordered the part it was easy and the time it took to arrive at my front door was literally a few days... I took the new knob out of the bag and popped it on where the old one use to be... and done... Thanks for an esy fix...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howell from Iron City, GA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Knob stripped out
Remove steel insert and install new knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JANI from LAMPASAS, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer Would Not Heat And Dry For Set Time
The knob had cracked on the back side. All you had to do is pull off the knob and slide the new one on. Pretty foolproof.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Mount Joy, PA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob cracked and would not turn shaft to set dryer time
Found replacement part easily on website using model and serial number.Part arrived in one day, fit perfectly without any tools and dryer is functioning like new. Easy ordering process with excellent customer service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe E from Ghent, KY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob
Went well. Excellent service on parts delivery .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Toni from Englishtown, NJ
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob cracked - needed to replace
Literally put the new knob onto the appliance and "WA-LA!" It worked no problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rachel from Spring Valley, NY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the timer knob would not turn on the dryer
Pulled off the knob, saw it was cracked, therefore it was not turning. The small metal part was stuck on the machine bit that the knob fits on so I pulled it off with a plier. Ordered a new timer knob that came with the metal part inside fit it on by hand in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LaVerne from Cincinnati, OH
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob was cracked & slipped over settings.
Simply pulled off old Knob and pushed on new Knob. Saved a house call plus repair fee.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Thomasville, NC
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Knob split
Pulled off old knob and clip. Slid on new knob. Thanks PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cary from Millbrae, CA
- Parts Used:
- WE26X20404
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Replace Cord Set
To get inside the dryer in this model is extreemly difficult. I had to remove the side panel. In order to do this I needed to take off the screws on the back cover side where I needed to replace the cord. Then I needed to remove the screws to take off the top cover, front door, rear panel, trim switch, and end cap. I also had to remove the front door. After that I could tak off the side panel and change the cord.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from Aberdeen, MD
- Parts Used:
- WH01X10060
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Dryer would not start.
Checked all thermostats, they were good. Circuit was getting 220 vac. Eventually found fuse in the back near the heating element, same was bad. By-passed same, and when we did, the timer Popped & arched !. Not sure why. Motor protectrion fuse found to be good. Heating elements good. Fuse was the only bad part found, never figured out what caused it to blow. Appliance was taken away after purchase of new one. Problem not found or resolved by self diagnostics. Originally the exhaust duct was somewhat clogged with lint, but not severely.
Was this instruction helpful to you?
Thank you for voting!