DBVH512GF0GG General Electric Dryer - Parts

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

This part is located on the housing for the heating element.

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.

This part is the replacement lint filter for your dryer. The frame of this line filter is made of white plastic, and is approximately 13 ½ inches wide and 6 inches long. The lint filter sits in your d...

Also known as Flame Sensor/Detector.