Models > DPSR483EA0WW > Instructions

DPSR483EA0WW General Electric Dryer - Instructions

Jump to:

All Instructions for the DPSR483EA0WW

Customer:: Adrienne from Beaver, PA
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Start knob broke from being turned too far

Fortunately I watched the video on how to change the knob. I may not have noticed that the metal clip part of the old knob was still attached. Once the old part was removed, the new knob slid right into place.

Was this instruction helpful to you?

Customer:: carolyn from sherman, TX
Parts Used:: WE1M654
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

the knob was cracked and the dryer would stay on settings..

pulled the old kob off and examined it and replaced it with the one i ordered...

Was this instruction helpful to you?

Customer:: BIll from Vero Beach, FL
Parts Used:: WE1M654
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Timer knob would not turn as plastic was broken.

Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.

Was this instruction helpful to you?

Customer:: joseph from no. attleboro, MA
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken knob on dryer

pushed replacement knob on shaft of dryer. machine works better than new. took less than 24 hours from time of order to time of delivery to my house.

Was this instruction helpful to you?

Customer:: jeffrey from hertford, NC
Parts Used:: WE03X37318
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Loud Squealling noise from dryer

Opened the door and removed 2 screws from inside/top of door. Removed top and then removed 2 screws from back of front panel. Lifted drum slightly to remove front panel and attached new slides.

Was this instruction helpful to you?

Customer:: Angela from Hewitt, TX
Parts Used:: WE1M654
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

timer knob on dryer had striped

At first i tried to repair the old knob before ordering one with tape and glue.kind of a mans thing you know and needless to say that didn't work so for a little while the man thing was we would adjust a crescent wrench to fit the shape of the shaft to set our time on the dryer. i looked all over our home depot stores and lowes here in town and no one carried the part. my wife Angela decided to look on line and see if anyone carried a part like this. thanks to you guys we were able to order the part and it came in and while i was at work my wife called me and said the dryer is fixed. she just fit the new knob on the shaft and it works like new. thank you part select you made my wife happy.

Was this instruction helpful to you?

Customer:: Kaye from Raleigh, NC
Parts Used:: WE1M654, WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

knobs split so didn't catch

Find the knobs online, order, put knob in place upon arrival.

Was this instruction helpful to you?

Customer:: Betty from Houston, TX
Parts Used:: WE1M654
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Timer knob was broken

took off the broken timer knob and put the new one on

Was this instruction helpful to you?

Customer:: Rene from Winter Garden, FL
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The plastic Start knob broke

Just push the new knob over the metal pin

Was this instruction helpful to you?

Customer:: Shauna from Bend, OR
Parts Used:: WE03X37318
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

High Squeaking noise

I removed the top of the dryer and saw that the top two drum slides where gone and the drum bearing itself was damaged I Temporally placed the parts on the drum bearing until I got the new one, that stopped the squeaking noise. All I needed to do was place the part with the hole on the little hook and then sled the other part in its slot.

Was this instruction helpful to you?

Customer:: Daniel from Maryville, TN
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Broken knob

Used pliers to remove old clip. Installed new clip and knob. Very easy.

Was this instruction helpful to you?

Customer:: Joseph from Middletown, NJ
Parts Used:: WH01X10060
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken Dryer Knob

Removed and replaced knob.

Was this instruction helpful to you?

Customer:: Rick from Naperville, IL
Parts Used:: WE1M654
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Timer Knob Was Broken

Replaced by hand. Took 5 seconds to repair.

Was this instruction helpful to you?

Customer:: Ken from Valdosta, GA
Parts Used:: WH01X10060
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

The old knob hasd split and wouldn't turn the dryer on

I took the visegrip pliers off the d shaft and simply slid the new knob on with ease. I never doubted my abilities!

Was this instruction helpful to you?

Customer:: Chrystelle from Laguna Hills, CA
Parts Used:: WE1M654
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Timer knob on our dryer broke off because of flimsy plastic

We ordered a timer knob from partselect.com and within 24 hours received our new, better, stronger time knob in the mail. We were very impressed with the customer service of this company and will definitely recommend to friends.

Was this instruction helpful to you?

All Instructions for the DPSR483EA0WW