DDE7000SBLWH General Electric Dryer - Parts

This front dryer drum bearing does not come with slides.

This screw is sold individually.

If your dryer is making a squeaking noise this seal may need to be replaced.

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in w...

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

This knob accepts a D-shaped shaft.

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used...

This wheel attaches to the motor.

Screws NOT included.

This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it.