Models > DPSR483GA0WW > Instructions

DPSR483GA0WW General Electric Dryer - Instructions

Jump to:

All Instructions for the DPSR483GA0WW
91 - 105 of 153
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
joseph from no. attleboro, MA
Parts Used:
WH01X10060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken knob on dryer
pushed replacement knob on shaft of dryer. machine works better than new. took less than 24 hours from time of order to time of delivery to my house.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jeffrey from hertford, NC
Parts Used:
WE03X37318
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Loud Squealling noise from dryer
Opened the door and removed 2 screws from inside/top of door. Removed top and then removed 2 screws from back of front panel. Lifted drum slightly to remove front panel and attached new slides.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kristen from Pasadena, MD
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob would not turn and dryer would not start
Take off the broken knob and snap on the new one. Take's less than 2 minutes. You make need a pair of needle nose pliers.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ricky from vero beach, FL
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
stripped knob
I saw the video and it was just as it was shown!! although there was one gliche....I didn't need pliers!!!It came soooo fast thx PartSelect!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda D from Middletown, PA
Parts Used:
WE1M654
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
crack timer knob
Replace the knob with new one
Was this instruction helpful to you?
Thank you for voting!
Customer:
BIll from Vero Beach, FL
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Timer knob would not turn as plastic was broken.
Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ezequiel from Las Vegas, NV
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Cracked timer knob
I had found out that reason the timer knob cracked was because the timer switch was turning very tight and caused the knob to crack and realized that dryer also needed a timer switched witch I also ordered from you. I really like how very helpful parts select is with the instructions you send along with the parts I ordered witch will save alot of time. Thanks For your help Ezequiel Escamilla
Was this instruction helpful to you?
Thank you for voting!
Customer:
carolyn from sherman, TX
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
the knob was cracked and the dryer would stay on settings..
pulled the old kob off and examined it and replaced it with the one i ordered...
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ellen from Ulysses, KS
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer would not start
We thought the timer was out on the dryer so I was looking for a new timer when I came across a video on your site about replacing a broken timer knob, so I decided to check the knob first and sure enough it was cracked. This video saved me a lot of time and money. Shipment was quick. Thanks.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diane from Johnson Valley, CA
Parts Used:
WH01X10060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed a new knob for my dryer
All I did was stick the knob on. How easy was that! Knob works every time. Very pleased with the part.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JANI from LAMPASAS, TX
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer Would Not Heat And Dry For Set Time
The knob had cracked on the back side. All you had to do is pull off the knob and slide the new one on. Pretty foolproof.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dale from Mount Joy, PA
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob cracked and would not turn shaft to set dryer time
Found replacement part easily on website using model and serial number.Part arrived in one day, fit perfectly without any tools and dryer is functioning like new. Easy ordering process with excellent customer service.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joe E from Ghent, KY
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken knob
Went well. Excellent service on parts delivery .
Was this instruction helpful to you?
Thank you for voting!
Customer:
Toni from Englishtown, NJ
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer Knob cracked - needed to replace
Literally put the new knob onto the appliance and "WA-LA!" It worked no problem!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rachel from Spring Valley, NY
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
the timer knob would not turn on the dryer
Pulled off the knob, saw it was cracked, therefore it was not turning. The small metal part was stuck on the machine bit that the knob fits on so I pulled it off with a plier. Ordered a new timer knob that came with the metal part inside fit it on by hand in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DPSR483GA0WW
91 - 105 of 153