DPSR405EA1WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kaye from Raleigh, NC
- Parts Used:
- WE1M654, WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knobs split so didn't catch
Find the knobs online, order, put knob in place upon arrival.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Houston, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer knob was broken
took off the broken timer knob and put the new one on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rene from Winter Garden, FL
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The plastic Start knob broke
Just push the new knob over the metal pin
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howell from Iron City, GA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Knob stripped out
Remove steel insert and install new knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joseph from no. attleboro, MA
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob on dryer
pushed replacement knob on shaft of dryer. machine works better than new. took less than 24 hours from time of order to time of delivery to my house.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jeffrey from hertford, NC
- Parts Used:
- WE03X37318
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Loud Squealling noise from dryer
Opened the door and removed 2 screws from inside/top of door. Removed top and then removed 2 screws from back of front panel. Lifted drum slightly to remove front panel and attached new slides.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kristen from Pasadena, MD
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob would not turn and dryer would not start
Take off the broken knob and snap on the new one. Take's less than 2 minutes. You make need a pair of needle nose pliers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joanie from Barlow, KY
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken start knob on dryer
old dryer knob had lost its spring and would not turn on. simply pulled old knob off and replaced by pushing new knob onto shaft. voila! saved myself a service call.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Converse, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The timer knob on my dryer broke
I didn't have a part number and went online and matched the part to the picture. It came the next day by FedEx and it took less than 5 minutes to replace the old part with the new part. Really simple and easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda D from Middletown, PA
- Parts Used:
- WE1M654
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
crack timer knob
Replace the knob with new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BIll from Vero Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer knob would not turn as plastic was broken.
Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ezequiel from Las Vegas, NV
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked timer knob
I had found out that reason the timer knob cracked was because the timer switch was turning very tight and caused the knob to crack and realized that dryer also needed a timer switched witch I also ordered from you. I really like how very helpful parts select is with the instructions you send along with the parts I ordered witch will save alot of time. Thanks For your help Ezequiel Escamilla
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carolyn from sherman, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the knob was cracked and the dryer would stay on settings..
pulled the old kob off and examined it and replaced it with the one i ordered...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Ulysses, KS
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer would not start
We thought the timer was out on the dryer so I was looking for a new timer when I came across a video on your site about replacing a broken timer knob, so I decided to check the knob first and sure enough it was cracked. This video saved me a lot of time and money. Shipment was quick. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JANI from LAMPASAS, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer Would Not Heat And Dry For Set Time
The knob had cracked on the back side. All you had to do is pull off the knob and slide the new one on. Pretty foolproof.
Was this instruction helpful to you?
Thank you for voting!