DPSR483GA2WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Howell from Iron City, GA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Knob stripped out
Remove steel insert and install new knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kristen from Pasadena, MD
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob would not turn and dryer would not start
Take off the broken knob and snap on the new one. Take's less than 2 minutes. You make need a pair of needle nose pliers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ricky from vero beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
stripped knob
I saw the video and it was just as it was shown!! although there was one gliche....I didn't need pliers!!!It came soooo fast thx PartSelect!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda D from Middletown, PA
- Parts Used:
- WE1M654
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
crack timer knob
Replace the knob with new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JANI from LAMPASAS, TX
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer Would Not Heat And Dry For Set Time
The knob had cracked on the back side. All you had to do is pull off the knob and slide the new one on. Pretty foolproof.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Mount Joy, PA
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob cracked and would not turn shaft to set dryer time
Found replacement part easily on website using model and serial number.Part arrived in one day, fit perfectly without any tools and dryer is functioning like new. Easy ordering process with excellent customer service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe E from Ghent, KY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob
Went well. Excellent service on parts delivery .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Toni from Englishtown, NJ
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer Knob cracked - needed to replace
Literally put the new knob onto the appliance and "WA-LA!" It worked no problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rachel from Spring Valley, NY
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
the timer knob would not turn on the dryer
Pulled off the knob, saw it was cracked, therefore it was not turning. The small metal part was stuck on the machine bit that the knob fits on so I pulled it off with a plier. Ordered a new timer knob that came with the metal part inside fit it on by hand in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LaVerne from Cincinnati, OH
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob was cracked & slipped over settings.
Simply pulled off old Knob and pushed on new Knob. Saved a house call plus repair fee.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Thomasville, NC
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Knob split
Pulled off old knob and clip. Slid on new knob. Thanks PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Adrienne from Beaver, PA
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Start knob broke from being turned too far
Fortunately I watched the video on how to change the knob. I may not have noticed that the metal clip part of the old knob was still attached. Once the old part was removed, the new knob slid right into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- leah from Ocala, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob cracked and dryer wouldn't start
Doesn't get any easier. Lined up the D shape on dryer and timer knob and just popped it in. Working great. I wanted to comment on the super fast shipping. I have never had anything ordered and delivered to my home so fast. It took less than 24 hours to get to my door from the time I ordered it and we chose just the regular ground shipping. Amazing!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BIll from Vero Beach, FL
- Parts Used:
- WE1M654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer knob would not turn as plastic was broken.
Removed small metal band on shaft and installed new knob.Very simple but the video that came with e-mail was helpful as I did not realize the metal band had to come off till I saw the video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joseph from no. attleboro, MA
- Parts Used:
- WH01X10060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob on dryer
pushed replacement knob on shaft of dryer. machine works better than new. took less than 24 hours from time of order to time of delivery to my house.
Was this instruction helpful to you?
Thank you for voting!