DRSR483GD3WW General Electric Dryer - Parts

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

Also known as Flame Sensor/Detector.

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This hi-limit thermostat acts as as safety mechanism that keeps the dryer from overheating.

This wheel attaches to the motor.

Also known as Drum Mounting Hub.

This thermostat is located on the blower wheel.

There is a slot in it for a ground strap.

Screws NOT included.