Models > GTDP180GD4WW > Instructions

GTDP180GD4WW General Electric Dryer - Instructions

Jump to:

All Instructions for the GTDP180GD4WW
106 - 120 of 321
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Edward from EDGEWATER, FL
Parts Used:
WE14X25080
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My last phase of repairs of minor items.
if your unit has over 6,000 hours of operations, one needs to remove the front panel and inspect the sliders that the drum rides on. The video were very helpful to replace the sliders. Unfortunately, my dryer had over 10,000 hours of operations over a 30 years period, hence a major repair costing over $200.00 dollars. The drum sliders were gone, hence the drum eat through the plastic guides. More so, the drum started to eat away the front panel. If the dryer is eating your closes and making a noise, one is looking at a $200.00 repair job. Hence check the sliders early will save one $$$$.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
willie from STATEN ISLAND, NY
Parts Used:
WE04X20415
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
bad timer fixed now
part took 10 days to come not part select fault took 3 days from st paul to new jersey went to woodbridge nj 2days to keasby nj another 2 days to edsion nj 2 days to staten island1 day took about 15 min to install dryer works fine now thanks part select
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from OLD TOWN, FL
Parts Used:
WD21X10261
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No power to dishwasher
Replace both micro switches.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from LEOMINSTER, MA
Parts Used:
WE05X20431
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Bulb was intermittently working
Inspected door switch operation and was working properly and simply looked for bulb in the dryer drum housing and located it immediately above the door opening,unscrewed it and noticed the broken elements inside. The bulb is a 10w/120V. Installed bulb problem solved.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from EDGEWATER, FL
Parts Used:
WE18X25100
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
take the old dryer lint screen out
Hand replace
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pete from CEDAR RAPIDS, IA
Parts Used:
WE05X20431
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Bulb burned out
Unscrewed the old bulb using the lefty loosey method. Installed the new bulb by turning it clockwise or righty tighty.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Bristow, VA
Parts Used:
WE03X37320, WE03X37319
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Rubbing noise while dryer was running.
After watching the video, the repair was very simple. There were no hiccups along the way. Special mention: the customer service is the best I've ever interacted with. Thank for making this a stress free experience.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from BELFORD, NJ
Parts Used:
WE4M415
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Switch not working.
Open the door and removed the part. Installed the new part and started the dryer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from NAPLES, FL
Parts Used:
WE01X20374
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Plastic knob cracked
Pull old off,
Push new on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Claudia from GILBERTSVILLE, PA
Parts Used:
WE1M659
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Actually, it was the timer snob.
Just slid right on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marcy from POMONA, NY
Parts Used:
WE01X20374
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
My clothes dryer stopped working in mid cycle
Upon closer examination I noticed the timer knob was cracked. I looked up the serial number in the manual, then easily located it on part select. I received the part quickly and like magic, my dryer is working perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from HUNTINGTN BCH, CA
Parts Used:
WE04X20415
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Dryer timer wasn’t working with auto dry or time dry
When I ordered it in the email receipt were directions- just click installation instructions- I also looked at u tube video by just typing in GE Dryer timer repair. It took longer to clean the floor where the dryer sat for years since we never move it. Cleaning time is included in the 15 minutes— You will feel great since just saved a ton of money. So glad I found you for future issues with appliance repair. There are U Tube videos to fix everything. Robert Maheu Huntington Beach
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from YARDLEY, PA
Parts Used:
WE01X20374
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knob needed replacement
installed new knob; paying $40 for this bit of plastic was obscene--it is the main cause for our not buying a GE appliannce again.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
victor from ST AUGUSTINE, FL
Parts Used:
WE18X25100
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
door filter
was no repair- removed filter from door and installed new filter into door. No tools required.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffry from ROCKVILLE, MD
Parts Used:
WE05X20431
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Burnt out bulb
Used a flash light to see, reached in and installed new bulb above the door
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTDP180GD4WW
106 - 120 of 321