DBSR453GB3WW General Electric Dryer - Parts

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

Also known as Flame Sensor/Detector.

This wheel attaches to the motor.

This hi-limit thermostat acts as as safety mechanism that keeps the dryer from overheating.

Also known as Drum Mounting Hub.

This thermostat is located on the blower wheel.