Models > DBSR453GB0WW > Instructions

DBSR453GB0WW General Electric Dryer - Instructions

Jump to:

All Instructions for the DBSR453GB0WW
61 - 75 of 292
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Cheryl from WILDER, KY
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Door handle broke
Called my son-in-law. Easy as pie
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from INDIAN SPGS, AL
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Timer knob and shaft had stripped
Replaced switch by taking out top 3 screws in back of control panel. Hold new switch in one hand and took out wire(female discount) one by one as they matched old switch. Put back in holding slot, screwed back together, DONE. If I had someone help it wouldn't have taken 10 minutes
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Deerfield, IL
Parts Used:
WE14X215
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
No heat from dryer. Diagnosed by others as the Gas Valve
Watched tecnician (I paid) as he diagnosed the problem. Four screws take of the top and front. Clothes drum slides out. Access to valve is good. Valve attaches to feed via compression fitting. Male end of fitting on unit is moved to new unit via allen wrench. Drive belt is re attached around drum and over idler easily. Part cost $90.00 shipp0ed to me. Technician asked $375.00 for this repair. Access the parts via placing the model number on Google Search.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jay from Niceville, FL
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Plastic tab broke on handle --- temp taped on.
My daughter, who has the dryer in Florida, made the repair herself. She removed the broken handle that had been temporarily taped in place. Cleaned off tape residue with Goo-Gone. Then took the new handle and snapped it into place. Worked just like it was supposed to.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
syd from wilmington, NC
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
no handle
just replaced the unit handle and how my wife can open the dryer without a screwdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John C. from Cincinnati, OH
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The door handle was comming off had broken hook
I pulled the old handle off and pushed the new one on.
No problem at all.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Margaret from SCOTTSDALE, AZ
Parts Used:
WH01X10060
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
My dryer wouldn't start, I saw the part on your website after reading comments from other people
I put the nob on the post, one side is flat the rest of the lever on the dryer is round. So I matched up the lever with he inside of the new knob and slid it on . The dryer works perfectly. I ordered it on May 5 th and the nob arrived May 15 th. I guess Georgia is a long way from Arizona. But the part fit perfectly and I am happy. Thankyou.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sally from MANHATTAN, KS
Parts Used:
WH01X10060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Start knob broke off
At first the knob seemed like it would not fit on, but after I sprayed it with WD-40 oil, it slipped with a gentle, steady push
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from ELVASTON, IL
Parts Used:
WH01X10060
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
On knob went bad
Took new one out of package, and push it on. 4 seconds!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Maria from MIRAMAR, FL
Parts Used:
WE1M654
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replace a broken timer knob
I just put the piece in place and it fit perfectly. I didn't need a tool for the installation.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bernice from INDIANAPOLIS, IN
Parts Used:
WE1M654
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
dryer would not turn on
ordered knob ,. pushed it on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judith from CARMEL, IN
Parts Used:
WE1M654
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
timer knob would not work - it just spun around - wouldn't catch
watched video on your site - pulled knob firmly straight off - pulled off small metal piece that remained on plastic dryer knob - pushed on new knob -!!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from MONROEVILLE, PA
Parts Used:
WH01X10060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken start knob
Just push knob on less than 4 seconds
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Earl from NORWAY, ME
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The knob cracked and a piece broke off.
Pulled a little piece off dryer and replaced it with a new dryer knob. Very easy and quick.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Troy, OH
Parts Used:
WE1M654
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob hole split
I ordered a new knob. The new knob was not broken, so it all worked out great.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DBSR453GB0WW
61 - 75 of 292