DBSR453EA1WW General Electric Dryer - Parts

This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This wheel attaches to the motor.

Also known as Drum Mounting Hub.

This thermostat is located on the blower wheel.

Screws NOT included.

There is a slot in it for a ground strap.