Models > UAN7506-87A > Instructions

UAN7506-87A Frigidaire Dryer - Instructions

Jump to:

All Instructions for the UAN7506-87A
1 - 15 of 23
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dianne from Kansas City, MO
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Catch broke, door wouldn't stay closed.
Used a screwdriver to pop out broken piece. Used pliers to snap in new one.
72 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from North Chatham, NY
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken door latch receptical
Removed broken part. Pressed replacement into opening.
19 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from ALLENSTOWN, NH
Parts Used:
5366021400
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Door Latch broke and fell out
remove new latch from package, insert into dryer door frame push into place with thumb until it snaps into place. Done!
11 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Arlington Heights, IL
Parts Used:
5308001614
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
knowing how to open the top
I unpluged the machine. Pried out the old switch with the tip of a screw driver. Pried off the connectors, there was not enough extra wire for me to connect the new switch through the front of the machine. I pushed the new switch in place. Using the screw driver I carefully pried open the top front of the machine { there were 2 plastic spring clips securing the top}. I placed a wash bucket on the drum to hold the top open , connected the 2 connectors to the switch and snapped top back in place.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Martinsville, IN
Parts Used:
5303207102
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Broken Door Strike
After the part arrived, I located a pair of needle nose pliers. Then removed the broken one and inserted the new one. It was very easy.
I also noted that the new part was of a better design than the original. It should not need further attention.
9 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Everette R from ANNISTON, AL
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The catch (female part) on the dryer developed a tiny crack. The door latch (male part) could not fit securely so the door would not stay closed.
I watched a You Tube video first. I used a screwdriver to loosen the part that was attached to the dryer. I pulled it out of the dryer with pliers. I pushed the new part into place. The old latch worked fine so I did not replace it.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Batesburg, SC
Parts Used:
5303207102
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
strike broken
popped in one in
7 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from SAN RAFAEL, CA
Parts Used:
5366021400
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken door clip
Literally pop it in the small opening. Super easy and works perfectly now!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
sandra from PLYMOUTH, MN
Parts Used:
5366021400
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Door latch receiver broke
Super simple pushed in the new receiver and boom all good and working
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anna from FLORENCE, KY
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dryer does not start
Followed video instructions, easy installation. Unfortunately it didn't fix the problem. Plan to take back off and check belt, etc before ordering another part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jason from Grandview, MO
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
latch assembly popped out partially on door and when it shut it broke the catch on the dryer.
Popped in new catch and used needle nose pliers to squeeze old latch flat and remove from door. New one just popped into place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lucille from Brookfield, OH
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Plastic Catch broke and door wouldn't close
Another parts website, instructed taking apart the dryer top and front and electrical connections etc. I thought I'd have to buy a new dryer!. Then I found your website, and I was laughing so hard, because your instructions were so simple and logical and took me under a minute to do the "repair". I used a plastic ice scraper instead of a metal putty knife (so as not to scratch the finish) to pry out the broken part. Then using my fingers on one hand I pushed in the new part. I closed the door to make sure the dryer started. It did. The end. Also I was told it would be a couple days till I received the ordered part. It was here in less than 24 hrs. Thank you for your excellent help.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald R from Dalton, GA
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door latch broke
It was super easy ! The part came and I had it done in less than ten minutes. No mechanical skills necessary !
Was this instruction helpful to you?
Thank you for voting!
Customer:
Angelique from Metairie, LA
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
The door could not close due to a problem in the latch
I replaced the latch on the body and on the door and it worked very well. I had to watch the video first. Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ANDRENNA from MAPLE HILL, NC
Parts Used:
5366021400
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dryer door wouldn't remain closed.
Once I received the product I placed it in the hole and it worked great.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the UAN7506-87A
1 - 15 of 23