Models > DE7000AWW1 > Instructions

DE7000AWW1 Frigidaire Dryer - Instructions

Jump to:

All Instructions for the DE7000AWW1
91 - 105 of 388
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Yucca Valley, CA
Parts Used:
134398500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken switch
Removed rear cover, unplug 2 spade connectors, twist out old switch, twistin new switch. plug connectors, install cover
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Regina from Richmond, KY
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer Knob broke off
Sooooo Easy. A no brainer. Just line up the knob and push it back on!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BARRY from HARRISBURG, PA
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob broke on the dryer
Pushed the new timer knob on the dryer. No tools were necessary.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
EDWARD from EDISON, NJ
Parts Used:
5303937139
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Our Clothes Would Get Caught In Between The Drum & The Front Cover, Making Marks On The Clothes.
I unpluged the dryer, raised the top cover up, removed 2 two screws & pulled front cover out. Removed the old seal, cleaned the area & installed the new seal. Reinstalled as new. Very, very easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from PORT CLINTON, OH
Parts Used:
5303281153
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Squeaking
Watched Video Provided. Very Simple Repair. Asked my lovely wife to hold drum in place while replacing drive belt. She gladly complied and is back doing what she seems to love most. And no, I'm not kidding. Our washer and dryer seem to run 24/7/365. I've completed various repairs on both appliances over the last couple of years and saved 100's of dollars thanks to this site .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from BROOKLYN, NY
Parts Used:
131658800
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Just popped the part I ordered right in and it's was closing in no time !
Just opened package and popped the part right in!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Verlin from Hampton, IA
Parts Used:
5303281153, 131553800
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Drum On The Dryer Quit Turning
1) I took a screw driver and pop the top lid up. 2) Took a philp screw driver and took 2 screws out of both sides of the front panal. 3) Lift up on the front panal and turned it out to the side. 4)Put the belt over the drum and on to the motor and tension pulley. 5) Put everything back together in reverse order starting with 3 ,2 and 1
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
April from CARYVILLE, TN
Parts Used:
5303281153
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Noisy
Took it apart and installed the parts. Then I threw the dryer in the trash and bought a new one.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MIKE from MASSAPEQUA PARK, NY
Parts Used:
131825900, 131724301, 131205400
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
dryer was squealing loadly
took off face of dryer, removed drum 4 screws removed two srews holding bearing and shaft ,replaced shaft bearing and shaft . Just for preventive maintenance i replaced idleling arm and dryer belt. I lined everything up replaced drum used shop vac to clean lint and dust from all parts replaced face of dryer and boom i got a btand new dryer
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Smyrna, TN
Parts Used:
5303937139
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Dryer leaving brown spots on clothes
First I raised the top of dryer, then removed 2 screws holding the front of dryer to the sides. removed old drum glide using a putty knife and glued new glide in place with glue provided. replaced front and top. The whole job took about 20 minuets and saved me the cost of new dryer
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joyce from Locust Grove, VA
Parts Used:
134011703
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins
The timer knob on my dryer broke off
When the part was delivered I opened the box and unwrapped the knob from the protective paper. I walked down the whole length of my hallway to the laundry room and carefully approached the dryer. Stealthily I reached across the top of the dryer and slid the knob onto the metal rod. Voila! I am now a certified Frigidaire Clothesdryer Repairperson!!
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Batesburg, SC
Parts Used:
5303207102
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
strike broken
popped in one in
7 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Emma from Omaha, NE
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knob on dryer broke so it wouldn't turn the timer on
I know that the knobs on the Gibson dryers break as they are plastic and the back cracks so it won't turn. I have had to get several new ones over the years. I went to Google put in Gibson dryer knob and found it, I had the model number so that helped. I had the part within 24 hrs, awesome service from PartSelect.
Emma W
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
james from tahlequah, OK
Parts Used:
5303281153
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
bearing went out
took apart and replaced parts easy to do but no one in my town can get me parts. thay want 100.00 gust to come out and look at it so found parts online and thats that
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Elizabethtown, PA
Parts Used:
131390300
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken lint screen
Lifted broken screen out and replaced it with a new one. Extremely simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DE7000AWW1
91 - 105 of 388