GLGQ642CAS1 Frigidaire Dryer - Instructions

just unplugged the old one, plugged in the new made sure it worked and put it back together.

parts arrive just like they said they would .had parts installed with in 15 minutes was drying clothes thank you your advice was perfect.

Taking apart cleaning putting back together I don't have any h-t lube so ill be doing it again. Thanks for the part ill be calling again!

Got the belt for my little bro's dryer . . . he and a friend tore into it without looking on how to do the job . 2 hours later dryer apart not fixed . . . LoL . . . Next day I get a Call asking me to find a repair manuel . . . I laught and told him to go to Youtube on his phone and the video would tell him how to do it ! He is back up and drying . . . Moral to this story . . . look before you leep !

Pulled old knob off and replaced with new knob. The hardest part of the repair was finding the part and partselect made that easy as well.

I opened the envelope that was waiting on the porch when I got home from work, opened it up, and pushed it on the shaft. It fit like a glove and looks more durable than the old one was. She'll never know I broke it. :)

Got the proper part and it worked great

replaced the knob. The key was the photos. It was celar that the part you had was the one I needed beacuse the phots were clear and with enough angles to assure me I was orederig what I needed.

I grabbed the new knob I ordered from Partselect.com with my right hand, aligned it, and put it on. Works like a charm!

I had my landscape guy, who volunteered to look at the dryer since he's also an electrician, come in and take a quick look. he turned the knob, pulled it off and told me the inside was cracked so it would not grab the turn mechanism. Who knew? I got the model number from the dryer door, checked in on the internet for Fridgedaire parts, found Partselect.com, ordered part, came next day, knob fits, dryer works. end of story. THANK U!!!

I ordered the new knob on a Thursday morning and received it the very next day. I will diffenently use PartSelect.com again and refer my friends.

Removed the top and front of dryer. Removed the old bearing and held the new bearing in place while my husband tightened the bearing into place......easy......now the dryer runs quiet again.

My dryer was heating up very briefly blowing hot air initially then cool. I have a stacking washer/dryer set (2002). I initially turned off the gas valve at the wall, ran the dry for several minutes to clear the gas line, then unplugged the power. I was then able to pop the top using a flathead screw driver, securely prop it open, unhook the wiring harness to the front panel, unscrew the two front panel screws, and remove the entire front without having to unstack the units. From there, you remove the two screws holding the bracket over the coils (2 of them), remove the electrical connectors attached to both coils and replaced them with the new ones. I then replaced all brackets, screws, and such (you'll need to lift the drum when putting the front back on and make sure it is lined up), plugged it back into power and turned on the gas to test the unit which worked perfectly. The 62% of the time seems to be an accurate figure as nothing else had to be done to the unit. Pretty easy stuff...good luck.

After reading other peoples problems i decided it must be the coils after looking at the picture of the part I looked at the dryer to find were the part was. it was right in front behind the inspection cover. so i order the part. it came very fast.these are not the first parts i have purchased from Partselect.the web site is newer now and i am glad because reading other peoples problems help me decide what was wrong with mine.PS Always clean every thing inside the dryer!! 15-20 min job one screw driver! (19 year old unit works fine)thanks to Partselect!!!

Unhooked wires turned switch to the left put new switch in and turned it to the right 1/4 turn and put knob on front of switch this is the best parts web I have been on so far.