GLER331CAS1 Frigidaire Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- joseph m from orange, CA
- Parts Used:
- 134886700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Clothes Dryer Timer Knob cracked at stem
The repair was actually quite easy. I first removed the metal crimp ring that was left attached to the dryer Timer stem (was originally molded into the back of the Timer Knob which cracked) by pulling on it with pliers. The new Timer Knob just required a mild push onto the Timer stem of the dryer. Job finished. I'm back on the road to using my clothes dryer once again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Everett, WA
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turn-on knob broke.
Removed broken knob and installed the new by hand.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from avon, CT
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dryer wouldn't start
looked at broken starter knob
picked up the replacement knob
put it on the metal stem
and voila!!!!!
picked up the replacement knob
put it on the metal stem
and voila!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ED from Byron, IL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob cracked
pushed on new knob... Really fast shipping!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CLARK from JUNEAU, AK
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken selector knob
removed broken knob..pushed new knob on..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ronald from charlotte, NC
- Parts Used:
- 134503600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
broken belt
I replaced this belt once before but it squeaked for over a year. This belt from Part Select was much better quality and now the dryer works perfectly, no squealing!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- diane from arlington hts., IL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
selector knob would not turn on tne dryer
i took the old knob off and put the new one on. it took about 10 seconds. it was simple.the service dept. was extremely helpful in getting the right knob. it was delivered the very next day. i would definitly recommend this company to anyone who has a parts problem.....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kimberleigh from Beecher, IL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My Dryer Knob Cracked and would not turn.
I received the Dryer knob in the mail the next day. All I had to do was slip it on. Very easy installation.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ted from Plattsburg, MO
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Selector knob broke
Took the old one off & put the new one on!!! About a 2 minute job!!!
Part arrived the day after it was ordered. Amazing service.
Part arrived the day after it was ordered. Amazing service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Isle of palms, SC
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken start knob on dryer
Put the knob on and done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kristen from clearfield, UT
- Parts Used:
- 134398300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
broken stem on on/off switch
just unplugged the old one, plugged in the new made sure it worked and put it back together.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roger from Bossier City, LA
- Parts Used:
- 134503600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broken belt and idler pulley
Removed top and front of dryer and rear panel. Installed belt and new idler pulley. Reinstalled top and front panel and rear panel. Dryer worked great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Botter from Livingston, TX
- Parts Used:
- 134503600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Drum was not turning
Removed access plate in rear, raised top panel, removed two screws holding front panel (with door) put new belt over drum. Threaded belt through path between motor drive and idler wheel. Put everything back together.
My order was shipped very promptly, and was received very quickly. It is wonderful to have this service available on the internet. I can remember how difficult it used to be chasing down parts before. This was impossible in smaller cities.
My order was shipped very promptly, and was received very quickly. It is wonderful to have this service available on the internet. I can remember how difficult it used to be chasing down parts before. This was impossible in smaller cities.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary T. from Bunn, NC
- Parts Used:
- 131553900
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
heating element went out
first i had a helper my 9 year old son. we came to this site and read a repair report and we used that to go by.once again my 9year old.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nora from Mt. Vernon, OH
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Starter knob broke off the machine
I pulled off the broken knob's metal shaft that remained attached to the operating spindle and slid the knob onto the machine.
Was this instruction helpful to you?
Thank you for voting!