Models > GLER331CAS0

GLER331CAS0 Frigidaire Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GLER331CAS0

Viewing 4 of 4
Cabinet/Drum Diagram and Parts List for Frigidaire Dryer
Cabinet/Drum
Controls/Top Panel Diagram and Parts List for Frigidaire Dryer
Controls/Top Panel
Front Panel/Lint Filter Diagram and Parts List for Frigidaire Dryer
Front Panel/Lint Filter
Motor Diagram and Parts List for Frigidaire Dryer
Motor
Keep searches simple, eg. "belt" or "pump".
Drum Belt – Part Number: 134503600
$16.75
The drum belt, also known as a drive belt, is a rubber piece that wraps around the dryer drum, idler pulley, and motor pulley and is used to make the drum rotate. If you can hear the motor running, bu...
In Stock
Order now and your part arrives by Mar 19
Selector Knob – Part Number: 134844410
$54.01
This selector knob is a genuine OEM replacement part for either your washer or your dryer. The knob is used to select the cycle desired for your laundry. If the knob has become cracked or damaged it w...
In Stock
Order now and your part arrives by Mar 19
Drum Support Bearing – Part Number: 131825900
$10.45
The drum support bearing is an authentic OEM replacement part for your dryer. The bearing is used to support the drum and allow it to rotate smoothly and quietly. If your dryer is excessively noisy wh...
In Stock
Order now and your part arrives by Mar 19
Heating Element Assembly – Part Number: 131553900
$65.23
If your dryer has little to no heat, there may be an issue with your heating element assembly. The heater element is a genuine OEM part that is found at the back of the dryer. The heating element come...
In Stock
Order now and your part arrives by Mar 19
Thermal Limiter - Limit 220 – Part Number: 134120900
$12.55
This thermal fuse limiter is used in dryers to monitor the temperature and make sure it does not overheat. The thermal fuse has a limit of 220 degrees Fahrenheit before the heating element and power a...
In Stock
Order now and your part arrives by Mar 19
Turn - Type Start Switch – Part Number: 134398300
$62.17
This part is used to start the dryer once you have selected a setting on the timer.
In Stock
Order now and your part arrives by Mar 19
Timer Knob - White with Gray Grip – Part Number: 134886700
$50.42
Sold individually. This knob accepts a D-shaped shaft.
On Order
Dryer Drum Bearing Bracket – Part Number: 131724301
$22.00
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
In Stock
Order now and your part arrives by Mar 19
Lint Filter – Part Number: 131450300
$30.85
This white dryer lint filter screen collects lint as it passes through the dryer vent.
In Stock
Order now and your part arrives by Mar 19
High Limit Thermostat – Part Number: 3204267
$52.99
The two-terminal high limit thermostat has a limit of 260 degrees Fahrenheit and acts as a safety mechanism that keeps the dryer from overheating. The thermostat will cut out when the internal dryer t...
In Stock
Order now and your part arrives by Mar 19
Idler Arm Assembly – Part Number: 131863007
$41.15
Part may differ in color from image. Please note that this is only a cosmetic difference.
In Stock
Order now and your part arrives by Mar 19
Screw – Part Number: 131302800
$23.05
This screw is designed to fit washers and dryers. Refer to the diagram provided by the manufacturer for further installation instructions and accurate application of screw in your tool.
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GLER331CAS0

Viewing 8 of 8
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Too hot
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not Heating
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing
How to fix it
Marks left on clothes
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Drum Belt

Replacing the Drum Belt

Replacing the Heating Element Assembly

Replacing the Heating Element Assembly

Replacing the Drum Support Bearing

Replacing the Drum Support Bearing

Replacing the Thermal Limiter - Limit 220

Replacing the Thermal Limiter - Limit 220

Replacing the High Limit Thermostat

Replacing the High Limit Thermostat

Replacing the Turn - Type Start Switch

Replacing the Turn - Type Start Switch

Replacing the Idler Arm Assembly

Replacing the Idler Arm Assembly

Replacing the Selector Knob

Replacing the Selector Knob

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kevin from Donalsonville, GA
Parts Used:
134886700, 134844410
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob replacement
Just slipped them on and ready to go. Ordered them on thur and got em on Tues.
381 of 390 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Juan Carlos from Weston, FL
Parts Used:
131553900
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
short circuit with a brasier metal support
Disconect the dryer from the main power source.

1) Remove the two screws from the rear / upper panel (below the control panel).

2) Snap the front side using a flat head screw driver.

3) On the inside front, remove two screws (one on each side) from the upper side and snap the door assembly off.

4) Remove the rear motor access panel (two screws) and appying tension to the spring remove the belt.

5) Pull the drum upwards (verticaly) unnapping it from the rear wall and remove it horizontally through the front panel.

6) Disconect the four leads to the heating element and remove the four screws from the rear of the dryer and replace the heating element.

Follow the same steps backwards to put the dryer together again.
Read less
235 of 273 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Newnan, GA
Parts Used:
134120900
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Thermal Limiter opened
Unplugged Dryer.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works.
252 of 333 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More