FSEC447GHS1 Frigidaire Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from Alto, TX
- Parts Used:
- 137513300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
There were several pieces broken around the band and as the drum turned, clothes would catch the cuts and slice right though like a razor blade
Take the top off the dryer. Once it's off, start inserting the bands from the inside. From the top or inside, control and move the drum as needed to insert band in place. Once band is in place, and holes line up, press down till you hear it snap in place. Repeat process with second band.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from Maple Shade, NJ
- Parts Used:
- 137513300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
My dryers was making a loud thumping sound. Like it was off balance.
I Took the front off and saw the cushion was gone around the drum and glids were worn down. I ordered both parts . It took 5 minutes to glue the cushion back on around the drum and 2 minutes to snap the drum glids on.But what I couldnt believe was the amount of lint that was all over the inside of the dryer.I would suggest to anyone to take the dryer front off once a year and clean it all out . I now understand fully why there are dryer fires.But the fix was cake and it runs like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from South Lyon, MI
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dryer starter knob broke
put new knob on the shaft, took less than 5 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BeLinda from Indianapolis, IN
- Parts Used:
- 131450300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter was broken
All I did was insert the new one! Service was excellent. I received it in one day!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clifford from Petaluma, CA
- Parts Used:
- 131644700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken plastic door handle
Snapped on the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ashley from Ripley, WV
- Parts Used:
- 131553900
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Heating Element burned up/ No Heat
Pulled front off dryer, popped the top up, took belt off pulley, pulled drum up and out just far enough to pull element out and put new one in. Very easy and quick. PartSelect always sends good quality parts and very quickly. I will use them for all my repairs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Middlebury, VT
- Parts Used:
- 134398300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
broken turn type start switch
just like the excellent video showed me. It was so easy and the web sight has a video to show me how to do it. Piece of cake! Thanks so much.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Woodland, ME
- Parts Used:
- 134503600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Broken drive belt
Raised the lid, removed 2 little screws,slipped the front panel off, disconnected the safety switch, vacuumed everything, slipped on the drive belt and reversed my way out. It was way more easy than filling a grease gun!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Margaret from Gainesville, VA
- Parts Used:
- 131644700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door handle broke off
I replaced it...just popped it in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darla from Alvin, TX
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
brocken knobs
Very simple just put the new ones on to replace the old knobs that broke. Thanks for the quickness of getting our parts to us. So nice to not have to use a tool to turn the dryer on. Very happy with the pricing and quickness it was delivered to us.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Penny from Austin, TX
- Parts Used:
- 131644700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
plastic dryer handle was broken during move
Used a flathead screw driver to pry broken handle out and snapped new handle right back in. Took no time at all. It was great and to top it off, I received the ordered item within 2 working days! Thanks so much. (I do not really know the age of the dryer as it belonged to my Mother who has been relocated into Hospice).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marilyn from Renton, WA
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The knob broke
I unplugged the 110 on the dryer, then popped the top on the dryer (with a screw driver), held the switch in place, bent the brass fittings to clamp the switch assembly to the front of the dryer panel and installed the knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rachel from Memphis, TN
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Dryer Starter Knob
I pulled off the broken knob and black fitter that was originally on the plastic piece. I didn't even need pliers. Then I replaced the new rotary knob under 5 seconds. Now the dryer works like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LINDA from LONGWOOD, FL
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
need knob
buy need knob
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shannon from San Juan Capistrano, CA
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Broken rotary knob
Easy peasy! It is as easy as lining up the knob with the D shaft on the dryer. There is a small piece/ring around the shaft that can still be stuck up inside so if you can't get the knob to sit flush with the dryer, peak inside and slide it off with a pair of pliers (the repair video shows this clearly if you need an example). I was done in 2 minutes, including the time it took to open the package!
Was this instruction helpful to you?
Thank you for voting!