FER231CAS2 Frigidaire Dryer - Instructions

Pushed the replacement knob onto the cycle selector. No tools required.

Technician was going to charge 65.00 to order the part (8.00) and push it onto the shaft/controller. He never called or showed up so I cancelled his service and did it myself. So glad the service person never showed. Saved 50.00!

Removed drum and replaced drum support bearing.

I used the posts on the site to ascertain the problem (fuze or element burnt out). The pictures were very helpful. I pulled the dryer to the floor and using my meter checked both the fuze and the element. The electrical diagrams were very helpful also. I took the dryer apart further to make sure the coil was indeed the problem. I then ordered the part!

Got the belt for my little bro's dryer . . . he and a friend tore into it without looking on how to do the job . 2 hours later dryer apart not fixed . . . LoL . . . Next day I get a Call asking me to find a repair manuel . . . I laught and told him to go to Youtube on his phone and the video would tell him how to do it ! He is back up and drying . . . Moral to this story . . . look before you leep !

Taking apart cleaning putting back together I don't have any h-t lube so ill be doing it again. Thanks for the part ill be calling again!

My Son-in law did the repair. He removed the top, the front lower panel and finally the front panel with the door. It took a little more time than anticipated because there was not any explicit directions on how much to remove to replace the belt, but he got the job done and put it back together very quickly. Glad I have him to help when needed:).

I simply had to open the plastic and stick the new timer knob on the dryer. It fit perfectly and more importantly, it arrived within 48 hours of me placing my order. Thanks!

I am very impressed with Part Select. My part arrived the next day without paying the extra shipping and my husband put the new knob on less than 30 secs.

I was surprised that the knob actually broke, and was also surprised at how much the part would cost direct from the manufacturer. The website had a ton of different knobs available, and I'm sure a number of them would have fit. The part showed up in just a few days and fit perfectly. Trying to set the dryer time using pliers makes a person appreciate the proper parts!

When the Time Knob broke, I planed to buy a new dryer. My friend told me of this site. I cheched the site and made the order, less than 36 hours, I received the part, less than 1 minute. I replace the knob and it bakc to work. It costs me only $15.

How I love this site!

Just replaced old knob.
Service was great. Ordered knob on Sunday and received new one on Tuesday,

I replaced this belt once before but it squeaked for over a year. This belt from Part Select was much better quality and now the dryer works perfectly, no squealing!

pulled old one off lined up new knob pushed on new one no tools-- less than a minute..

took off the old one,and the inner sleeve and put on the new one.

After pulling up the Frigidaire site on internet, there was a video as to how to replace the knob. Very simple to replace. Ordered it and the turn-around time was very fast.