Models > FER211CAS1 > Instructions

FER211CAS1 Frigidaire Dryer - Instructions

Jump to:

All Instructions for the FER211CAS1
76 - 90 of 188
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas F. from Whitmire, SC
Parts Used:
134813600
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
clothes hanging-up during the drying cycle,leaving marks on the garments.
as on the video. so easy. took longer to clean-up
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Midlothian, VA
Parts Used:
131825900
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
worn bearing
Taking apart cleaning putting back together I don't have any h-t lube so ill be doing it again. Thanks for the part ill be calling again!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Botter from Livingston, TX
Parts Used:
134503600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Drum was not turning
Removed access plate in rear, raised top panel, removed two screws holding front panel (with door) put new belt over drum. Threaded belt through path between motor drive and idler wheel. Put everything back together.

My order was shipped very promptly, and was received very quickly. It is wonderful to have this service available on the internet. I can remember how difficult it used to be chasing down parts before. This was impossible in smaller cities.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roger from Bossier City, LA
Parts Used:
134503600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Broken belt and idler pulley
Removed top and front of dryer and rear panel. Installed belt and new idler pulley. Reinstalled top and front panel and rear panel. Dryer worked great.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ronald from charlotte, NC
Parts Used:
134503600
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers, Socket set
broken belt
I replaced this belt once before but it squeaked for over a year. This belt from Part Select was much better quality and now the dryer works perfectly, no squealing!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Byron from Union City, PA
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken timer knob on dryer
pulled old one off lined up new knob pushed on new one no tools-- less than a minute..
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
philip from clarksville, TN
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
timer knob was shot.
took off the old one,and the inner sleeve and put on the new one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Suzanne from Dallas, TX
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
when the timer dryer knob kept turning around I knew something was amiss. Pulled the knob off and saw that it was cracked.
After pulling up the Frigidaire site on internet, there was a video as to how to replace the knob. Very simple to replace. Ordered it and the turn-around time was very fast.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eric from Brooklyn, NY
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Original knob cracked
Simply slid on the new knob. No tools necessary.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ray from auburn, AL
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed replacement knob
Found part through Google, ordered part and received it in three days. Easy as pie
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Yee-Mei from Ellicott City, MD
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Time Knob is broken
When the Time Knob broke, I planed to buy a new dryer. My friend told me of this site. I cheched the site and made the order, less than 36 hours, I received the part, less than 1 minute. I replace the knob and it bakc to work. It costs me only $15.

How I love this site!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
AL from MADISON, OH
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer Knob was stripped on the inside
Very easy to do, just take off old knob, and replace by pushing the new one on!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
deborah from watertown, NY
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed to replace timer knob
the part came very promptly - I opened the box & took out the knob walked to the dryer & pushed it in place , appreciate the great & honest service thank you
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Euless, TX
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
original timer knob broken
Just replaced old knob.
Service was great. Ordered knob on Sunday and received new one on Tuesday,
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rhonda from Virginia Beach, VA
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
timer knob broke
Repair was simple and easy. I thought I was going to have to get a new machine.

Thanks

First, I took the new knob out. I slipped it easy on the washing machine.

It was all done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FER211CAS1
76 - 90 of 188