Models > FSG446RHS3 > Instructions

FSG446RHS3 Frigidaire Dryer - Instructions

Jump to:

All Instructions for the FSG446RHS3
121 - 135 of 523
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
NICOLE from WEST JORDAN, UT
Parts Used:
131658800, 131302800
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door catch wasn't working and screws in door were loose.
popped the catch in existing hole and replaced the screws
10 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip from Marysville, WA
Parts Used:
131873500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob broke
Pulled off the old knob, pushed on the new knob. It was that easy.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
chris from dallas, TX
Parts Used:
131658800
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Latch on dryer no longer worked
So easy! I ordered the part on the website. Received it 24 hours later. And popped it in place. Good as new.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lewis from Thornton, CO
Parts Used:
131825900
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
loud squeeling noise
After changing the drum support bearing, and the front felt ring, the noise continued. It turned out to be the tensioner pully. The harmonic vibration travels throughout the dryer box like an instrument so you can't tell where the sound is comming from. Before you do anything, spray a little wd40 between the bushing and the shaft on the belt tenioner pully. If the squeel goes away, you have found your smoking gun.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allan D from REDLANDS, CA
Parts Used:
137551901
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
the attached anchors and holes linled up about 80% of the time.
I cut off the four that didn't line up - I suppose since this was a gasket that fit several makes, I should expect this type of problem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Myrna from Apache Junction, AZ
Parts Used:
134398300
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The start switch was broken
Took the front off the dryer and removed the old switch and put in the new one.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from PORT CLINTON, OH
Parts Used:
5303281153
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Squeaking
Watched Video Provided. Very Simple Repair. Asked my lovely wife to hold drum in place while replacing drive belt. She gladly complied and is back doing what she seems to love most. And no, I'm not kidding. Our washer and dryer seem to run 24/7/365. I've completed various repairs on both appliances over the last couple of years and saved 100's of dollars thanks to this site .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eileen from SHERIDAN, CA
Parts Used:
137513300
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Glide was broken
I watched the video on the repair and followed it. Super easy. Repair only took 30 mins. Please note there are 2 glides. Make sure to order 2.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from BLACK EARTH, WI
Parts Used:
131873500
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
old knob broke and fell off
Pushed the new knob onto the shaft
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donna from BAKERSFIELD, CA
Parts Used:
131644700
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door handle on washer broke.
Took out of package. Used screw driver to pop off old broken handle.
Installed new part in a minute or two. Nothing to it. Was very pleased to get the part and so easy to install.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from CUMMING, GA
Parts Used:
134222900
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top hinge on clothes dryer separated, leaving door difficult to open/close
Ordered part from partselect.com. Part was back ordered; however they were very proactive in communicating status updates! When it arrived it was simply a matter of removing door using a philips screwdriver, installing the new hinge and presto - job complete! Kudos to partselect.com ??
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anne from SANTA BARBARA, CA
Parts Used:
131644700
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Plastic door handle for dryer needed to be replaced.
Snapped the new door handle replacement from this site in place. Fits perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doug from TROUTDALE, OR
Parts Used:
131644700
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dryer door handle broken
I just used a putty knife to remove the broken one. It just popped right off.
The new one just popped into place.

I want to say that the girl / lady that answer the phone was extremely helpful and very professional,.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edwin from Dallas, TX
Parts Used:
131965300
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob of the "ON" key was broken.
Removed the broken knob and pushed on the replacement knob. A pure "no-brainer."
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from COVINGTON, KY
Parts Used:
131863007, 134503600
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Could not do as video.
Had to open back side vent & use needle nose to secure spring.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FSG446RHS3
121 - 135 of 523