WTMC8320US (05) Bosch Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Philip from MOCKSVILLE, NC
- Parts Used:
- 00491647
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Top of door hinge arm broke.
Remove 4 screws on plastic cover of hinge that connects to the door. An assistant will come in handy at this point to hold the door. Then remove 2 screws holding hinge. Push up on hinge and pull out to remove hinge bracket. Hinge pins has plastic covers that need to be in place before attaching to the door. A small amount of vaseline will hold them in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from SHERIDAN, MT
- Parts Used:
- 00491647
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Top part of door hinge broke
For this dryer a ratcheting screwdriver set was a must. Follow the directions from previous posts and you're done. Easy 5 minutes!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laurence from WEBSTER, NY
- Parts Used:
- 00491647
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door hinge broke
Removed old hinge and replaced with new.... Door works great! Thanks
Was this instruction helpful to you?
Thank you for voting!
no heat on the dryer
Did a quick on line search of the problem and found the Limiter Switch is normally the solution.....loaded the model number in the PartSelect data base and received the correct part the next day (standard shipping)! Replaced the part in about 45 mins and works perfectly. While I was ordering the Limiter switch I figured it was a good time to replace the drum light bulb as well. Again, perfect match. Great experience with PartSelect, will be sure to use them again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from FLINTVILLE, TN
- Parts Used:
- 00491647
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Wrench set
The pot metal door hinge broke so I ordered on from this company.
The delivery date blew past and at day 11 of waiting, I fabricated a new hinge in my shop out of steel. The crappy pot metal replacement showed up two days later=13 days late. Now i have this $40 piece of pot metal garbage laying around that I'll never use because I made a hinge out of steel LIKE THE FACTORY SHOULD HAVE DONE IN THE FIRST PLACE. You people could have put the part in a $7 mailer envelope from the post office instead of shipping with the worst delivery agent in the free world (FedX). I hope I never need anything from your store again.
Was this instruction helpful to you?
Thank you for voting!