WTA4410CN ((01)) Bosch Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from Key West, FL
- Parts Used:
- 00429525
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dryer won't heat
If your Bosch dryer isn't heating, open the back of the dryer and there is a temp sensor that if it gets too hot, it trips. push the red button to reset. If it trips again, check all your vent tubes for lint build up. If after cleaning it still trips, you may need to replace the heat sensor. After tripping a few times it will get weak. Order a new sensor and replace it. Only two screws and two quick connect wires.
Was this instruction helpful to you?
Thank you for voting!