NDE2335AYW Amana Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Steve from fremont, NH
- Parts Used:
- WPY503978, WP40113801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Socket set
no heat
I followed your online instuctional video. It was a really easy job. The dryer works like the day I bought it. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melanie from Manchester, TN
- Parts Used:
- WPY503978
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench set
First neede heating element, then replaced idler puller, drum support wheels & belt,.
Dryer had not been used in over 2 years. After replacing the heater element...it started making very loud screeching noises. Decided to then order all other parts that said could solve noise problem. Felt if I was going to take it apart again, might as well replace everything new. Very helpful video instructions online...took less than 30 mins. the 2nd time. It now runs so smooth, you can't even tell the dryer is running. This website is wonderful!!!!!! The troubleshooting descriptions, parts list, availability of parts, fast delivery, everything is right here to fix anything. If you can't find it....it can't be fixed !!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Fall River, MA
- Parts Used:
- WP40113801, W10169313
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Socket set
Dryer would not come on.
I followed the instructions on the video fom the website they were clear and precise and I had no idea how easy it would be, thank you... you saved me some $$$ ! It took me close to 2 hours to do the job but it was because I cleaned the dryer and vaccuumed the lint/dust buildup which took some time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from Castro Valley, CA
- Parts Used:
- WP40111201, WP37001287
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Idler pulley worn and belt broken.
Took the dryer apart through online instruction. Replaced idler lever and belt.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Merle from Phoenix, AZ
- Parts Used:
- WP37001287, WP500121
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Socket set, Wrench set
Squeal,drum noise
I used a putty knife to depress the top locks which then i could set the top back.Remove the two screws on the inside of front top to release the front base.Lifted front cover up and out of the chassis. Then i removed the front blower cover which has 4 screws holding it and gently pulled out. I then reached into the back and released the idler lever so i could remove the belt from the motor.I then pulled lightly on the drum and removed it also. At this point i remove the idler lever and reinstalled the components. I find the maytag machines are very easy to work on.Dryer works like new. Parts Select is a great place to get the needed parts,very fast turn around time on the parts and also great prices.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doug from Shelbyville, KY
- Parts Used:
- WP40111201, W10169313
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Slipping drum, and broken door switch
Just like in the video. A very simple repair
Was this instruction helpful to you?
Thank you for voting!