ADE20L2W Admiral Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ron from Kosciusko, MS
- Parts Used:
- LA-1044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
No Heat
UNPLUG DRYER!!
1)Opened top with putty knife pushing on the two spring clips.
2)Removed Hi Limit switch w/bracket (1 screw)
3)Removed Old Element (1 Screw)
4)Installed New Element
5)Replaced Hilemit Switch on bracket (2 Screws)
6)Reinstalled Hi Limit switch/bracket
7)Reinstalled wires/Closed Lid/Plugged In/Started Up....No Problem
1)Opened top with putty knife pushing on the two spring clips.
2)Removed Hi Limit switch w/bracket (1 screw)
3)Removed Old Element (1 Screw)
4)Installed New Element
5)Replaced Hilemit Switch on bracket (2 Screws)
6)Reinstalled Hi Limit switch/bracket
7)Reinstalled wires/Closed Lid/Plugged In/Started Up....No Problem
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from Meriden, CT
- Parts Used:
- 53-1758
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
SPARkS CAME FROM THE TIMER
Unpluged the dryer and removed the rear cover to get access to the timer. Removed the control panel and unscrewed the timer leaving the wires connected. One by one connected the wires to the new timer along with the resistor. Secured the timer to the control panel and attached the control panel and rear cover. If you have enough room you do not have to remove the control panel.
The dryer works great.
The dryer works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Rancho Mirage, CA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door catch, male portion, broke off
Popped in the new part. Really! That easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Luis from Arlington, MA
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door wouldn't stay closed
I used a screwdriver to pry out the broken door latch and inserted the new one in the same slot. Perfect fit. The picture of the part in the order page was a big help to identify the correct part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Great Falls, MT
- Parts Used:
- LA-1044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
broken heater element
Replaced thermocouple and heating element, clean build up dust lint inside as well. Actual repair takes only removal of 2 screws. Cleaning inside takes longer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Andrews, IN
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Mouse ate hole in lint filter
Glad I ordered 2 lint filters. Mouse ate a hole in the new one also. EXCELLENT service, by the way. Received filters less than 24 hrs. after ordering.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth D. from Norcross, GA
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced lint filter on dryer
Replacement was simple & easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ian from Greeley, CO
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door would not stay closed because metal latch piece was gone.
I ordered the part. ( I should have ordered just in case it happens again.) When it got here it took less than a minute to snap it in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from Columbiana, OH
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door Catch broken
The old door catch broke and fell into the unit. Ordered the new part which arrived fast and snapped it into place. Perfect fit and the door now closes/latches correctly - like new again. Would recommend your web site to all do-it-yourselfers. Loved browsing your site, especially seeing all of the schematics and parts list for my unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Altoona, IA
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original lint filter was separating at the edges
Removed the old lint filter and slid in the new one. It took me longer to get the box open to get the new lint filter out than it did to actually replace the part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- stephen from Harrisburg, PA
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the frame of the lint filter was cracked
well.....first I opened the dryer door and pulled out the old cracked lint filter...then I took the new lint filter out of the plastic bag and put it in the dryer......and then I closed the dryer door.....then I had a beer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lyle from Sturgeon Bay, WI
- Parts Used:
- WP53-0918
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My original lint filter had a small tear but was letting through much lint.
I put the new one in. Ta Da :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sarah from Bristol, IN
- Parts Used:
- LA-1044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Heating Element
It took longer to gather the tools vs changing the part. I was unsure how to start. Once I got started it was very easy it took 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from Alexandria, KY
- Parts Used:
- LA-1003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Install new latch
Just snapped the new plastic latch into the hole (the hole was there because in trying to extract the old latch, it fell into the inside of the door). Took two seconds. Order to arrival of the part took only 22 hours!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Erik from Lancaster, PA
- Parts Used:
- 530106
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Dryer would not dry the clothes
t
Was this instruction helpful to you?
Thank you for voting!