AED4370TQ0 Admiral Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- pamela from ocean springs, MS
- Parts Used:
- WP8299781
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Timer would not advance
I unplugged dryer. Took the top back plate off. Removed the dial and the screw on the front. Removed the two screws from the back and pulled the timer out. Pulled wires off one at a time and put them on the new time in the exact place and screwed it in. Put the screw and front plate on and plugged dryer in and checked it. It worked. Unplugged dryer again and put back plate back on. Done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenny from Euclid, OH
- Parts Used:
- WP3392519
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dryer would run, but not heat
Removed the back panel, found the fuse and replaced it. Easiest thing I've ever done! I was expecting it not to be the problem, but I started with the "most common" issue via the website. Voila...it was the problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ryan from Ottawa Lake, MI
- Parts Used:
- 279838
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Dryer was not producing heat
Installed new heating element. Simply watched the provided youtube video and replaced the heating element. Job took approximately 30 minutes from start to finish, very simple fix. Saved a couple hundred bucks by doing it myself and I have limited knowledge on dryers!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from North Chesterfield, VA
- Parts Used:
- 279570
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Plastic catch broke
little more than vedio showed has a see thru door had to tke door off machine then was easy replacement and re install
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Frankfort, KY
- Parts Used:
- WP3392519
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Indicator lights blinking, not drying, auto settings not working
Unlike your video, with this model, the thermal fuse is located near the front of the dryer, which I didn't find out until the back was already off.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Melbourne, FL
- Parts Used:
- 279570
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
dry door latch broke
I watched the online video first, which made the removal and installation fast and easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Erie, PA
- Parts Used:
- 279457
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
couldn't get the wire connection anywhere after we bought the heating element.
we received the two heating element wires in 3 days and connected the heating element with no problem works great.
Was this instruction helpful to you?
Thank you for voting!
Dryer would heat up initially, but heat would cut off and clothes wouldn't dry.
I wasn't sure which part was the problem, but the PartSelect web site is very helpful suggesting likely parts for various problems. I ordered two parts from PartSelect - a Cycling Thermostat and a Thermal Cut-Off Kit. Each of the two parts had an installation video available on the PartSelect web site. I followed the video instructions for each part. Very easy to follow, no problems at all with installation, problem with dryer is now solved. I might add I was amazed how quickly the parts arrived after I ordered from PartSelect. Parts arrived 2nd day after placing order. I would not hesitate to use PartSelect for any future needs.
Was this instruction helpful to you?
Thank you for voting!