Models > DP15501 > Parts

DP15501 Ridgid Drill Press - Parts

Jump to:

49 - 60 of 117
Keep searches simple, eg. "belt" or "pump".
Knob Motor Adjusting – Part Number: 817320
No Longer Available
Insert Pulley – Part Number: 821734
No Longer Available
CORD W/PLUG – Part Number: 089140313086
$19.56
This is a genuine part that is supplied by the original manufacturer for use with Rigid drill presses. When plugged in, the power cord transfers power to the unit. This part is made of flexible plasti...
Special Order
Wrench Hex L 5mm – Part Number: 813317-8
$4.30
Special Order
Cap Spindle – Part Number: 829688
No Longer Available
Clamp Table – Part Number: 817290-3
No Longer Available
Screw Pan HD M5 X 0.8-6 – Part Number: 820240-3
No Longer Available
Socket Bulb Asm. – Part Number: 829595
$7.73
Special Order
Spacer – Part Number: 817536
This is an authentic Ridgid replacement part that has been sourced from the original manufacturer to be used with drill presses. The spacer is used to separate the two bearings on the insert pulley sh...
No Longer Available
Operator
No Longer Available
Screw Soc Cap M4 X 0.7-10 – Part Number: 820378
No Longer Available
Bearing Pinion Shaft – Part Number: 828928
No Longer Available
49 - 60 of 117