WDT720PADW3 Whirlpool Dishwasher - Parts

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

This part is used to hold the access panel in place. Sold individually.

This drain hose is 6 and 1/2 feet.

This tine row is for the top rack of your dishwasher, and prevents cups, dishes, and other items from moving around during the cycle. If your current row is missing one or more tines, or the tines hav...

This door latch secures the dishwasher door and signals the control board when closed, allowing the cycle to begin. If the door won’t latch or the dishwasher won’t start, the latch may be faulty. Comp...

This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

This dishrack roller assembly is a genuine OEM replacement part for your dishwasher. This part attaches to the dishrack in order to roll the rack in and out of the dishwasher. You will need a flat bla...

This part is used to drain water from your dishwasher.

Also know as a diverter valve. This diverter motor is for dishwashers. Diverter motor controls the flow of water to the spray arms. Unplug the dishwasher and shut off the water supply before i...

This lower dishwasher rack is a genuine replacement component designed to provide flexible and secure loading for both small and large dishware. Measuring approximately 22 inches by 21 inches, it feat...

This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispen...