Models > DU8950XT2 > Instructions

DU8950XT2 Whirlpool Dishwasher - Instructions

Jump to:

All Instructions for the DU8950XT2
61 - 75 of 130
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ricker from KESWICK, VA
Parts Used:
675806
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
noisy
watched a video
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Howard from Boynton Beach, FL
Parts Used:
350930
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
23 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MICHAEL from VALLEJO, CA
Parts Used:
WP304204
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Existing Spray Arm Broken
Snapped in new part
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Dayton, TX
Parts Used:
W10311986
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Dishrack Tines were breaking off due to age
The rack came with pictorial instructions which were fairly veg, however they were to the point. The wheels snapped into place easily, and the center water transfer tube twisted off the old one and twisted on the new one just fine. It is a very good idea to keep the old one out to look at as a guide. There were no instructions on how to remove the transfer tube, I was lucky to have already worked on these before. After that it fits and works just peachy.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Palm Springs, CA
Parts Used:
WP300845
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Part
I just installed the new part. There were no tools required. I bought an extra part
I ordered the part on Monday, and it arrivefor the other side in case it breaks.
d by FedEx the next day. I live in Southern California.

Great service, thanks.
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Katherine from Coos Bay, OR
Parts Used:
W10311986
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
We needed a new bottom dishrack the old one was very rusty
I ordered a new rack, snapped the stuff together, and slid the old one out and the new one in. Fit beautifully. Piece of cake and much cheaper than a new dishwasher.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Jupiter, FL
Parts Used:
675544
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Drain hose cracked. Leaked and warped wood floor.
Checked fill line. No leak. Checked drain hose, found crack in hose. Ordered the part, replaced.

Removed hose clamps on drain to DM and garbage disposal. Replaced hose and tightened clamps. Checked for leaks. Buttoned up faceplate on bottom of DM.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phillip D from Auburn, AL
Parts Used:
4387043
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Latch had broken on detergent dispenser cover
Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.
8 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Erving, MA
Parts Used:
674744
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Door comes down to fast, Broken Door Assist Spring
Turn off power at breaker
Turn off water supply
Remove 2 screws at baseboard plate
Remove 2 mounting screws attaching machine to floor
Open door, remove 2 mounting screws attaching machine to bottom of counter
Disconnected water line
Carefully pulled machine out about 8 inches to expose broken spring
Attached new spring using directions included with package from PartSelect
Reassembled in reverse order
Check for water leak before attaching baseboard plate
2 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Philip from Greene, ME
Parts Used:
W10311986
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Installed wheel assemblies to rack
Assemblies snap on, no tools needed
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Las Vegas, NY
Parts Used:
4387043
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
soap door hinge broke
I took the pin and i slide it through the first hole attached the spring then sldie it through the second hole and snap the cover on
4 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nicole from Newnan, GA
Parts Used:
4387043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The previous rod holding the cup in place broke
Remove completely the old one and installed the new entire kit.
2 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
craig from Columbia, TN
Parts Used:
4387043
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
was just missing the door and spring
You slide the pin that holds the door in the first hole. then you slide the spring in next. The you slide the pin through the last hole. After that you gently push the door onto the pin till it snaps into place. And your done.
4 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karolyn from Wellington, FL
Parts Used:
WP304170
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Super Fast Shipping
The part arrived the next day with regular postage, outstanding service.
7 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lola from Graeagle, CA
Parts Used:
675806, 675238
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
dishwasher wasn't draining
Watched your video
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DU8950XT2
61 - 75 of 130