DU5000XW0 Whirlpool Dishwasher - Parts

This clamp helps to prevent leaking by holding the end of water hose in place.

Located at the bottom.

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

This part goes at the end of the rail to stop the dishrack from falling out.

This is the pump housing only.

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off...

This rocker switch can be used for both the oven selector and/or the oven light.

This screw is sold individually. Size: 8-32 x 1/4 inch.

This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.

This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying wa...