Models > MDB8969SDH0 > Instructions

MDB8969SDH0 Whirlpool Dishwasher - Instructions

Jump to:

All Instructions for the MDB8969SDH0
91 - 105 of 134
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
G from BISMARCK, ND
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
A wheel on the lower dish rack wheel assembly broke off.
Pry the old wheel assembly and snap the new one in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sheldon from LOS ANGELES, CA
Parts Used:
WPW10546503
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The instructions were not clear and had no illustrations
I just looked at the matching piece on the other side of the rack and used it as a guide to install the new part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from Drexel Hill, PA
Parts Used:
W11177741
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Original door seal came out while emptying dishwaher. It was pretty messy so i ordered a new one.
I just followed the directions on the video that was part of the pictures for the door seal. I made sure that the channel was clean and the new seal pressed right in. i wish I had checked this site before I called a repairman, who wanted to charge me over $400 for a new one.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Duluth, GA
Parts Used:
WPW10348269
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dishwasher wasn't draining
The video does a great job explaining the repair. I took the unit completely away from the wall and put it on its side, which I recommend. Only problem I had was getting the new part in the correct orientation to lock... try to pay attention to how the failed pump is facing when you remove it.

I ended up replacing the supply line as well as just moving it around caused a drip leak, guess it was about to fail. Pro tip: don't remove the old line until you have the new line in hand... but that's a story for another day.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lana R from THE HILLS, TX
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
The wheel fell from the lower dish rack--the front left hand side.
We snapped the old one off --it did not break. We positioned the new one in the right place making sure that the slot in the middle matched up with the longitudinal wire of the rack and snapped it in place. EASY!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathleen from WHITEHALL, PA
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Wheels kept coming off.
Took off the broken part replaced it with new part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Walter from FRANKSVILLE, WI
Parts Used:
WPW10348269
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
would not drain
watch how it was done on computer
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Troy, MT
Parts Used:
WP8270020
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Replaced door springs and installed cable kit
Viewed the video and, Done!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diane from PITTSFORD, NY
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
A wheel on the lower rack had broken off
Easy to local the part on this site with an easy fix when the part arrived as scheduled
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from ESTERO, FL
Parts Used:
W10195416
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
broken wheel
Remove old assembly: use screwdriver to depress 2 wedges that lock assembly on wire rack. After removed. new assembly will snap into place
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
TRACEY ANN from BRICK, NJ
Parts Used:
WPW10195039
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
DISHWASHER WOULD NOT FILL WITH WATER
Unscrewed bottom panel of the dishwasher and simply replaced the bad control switch with the new one.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cameron from DEFIANCE, OH
Parts Used:
W11177741
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Water leaking from out the bottom of door.
Watched the video provided by this site on changing a dishwasher door seal and then replaced my seal as per video. Very simple task. I think the key point of installation is folding the new seal in half to get the midpoint and then inserting that spot first using door latch as midpoint guide and bring the seal around both corners to the bottom. Works perfect.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marvin from WANTAGH, NY
Parts Used:
W10195416
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
wheel broke off the lower rack on my dishwasher.
Just snapped in the wheel assembly very easy.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terry from Mertens, TX
Parts Used:
W10861000
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Dispenser Slide Lid Missing
After Accessing Inner Panel of Door. Opened 8 Small Tang Clips Holding Unit. Cleaned Surface and Straightened Tangs. Popped Unit In Securely & Reassembled. Cleaned Drain Strainer to Load & Wash !
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from Mount Washington, KY
Parts Used:
8212560
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dishwasher Loose
Installed brackets
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MDB8969SDH0
91 - 105 of 134