MDB8969SDH2 Maytag Dishwasher - Parts

If your dishwasher door is not opening or closing properly, it may be time to install a new balance kit. This part helps to support the weight of the door as it opens and closes. You should also check...

The mounting bracket is used to secure the top part of your dishwasher to the underside of your counter or cabinet. If you have solid surface counters (granite, quartz, etc.) you will likely need to s...

If the dish rack in your dishwasher is no longer sliding in and out easily, it may be time to replace the slide track. This genuine OEM part is used for the left-hand side of your dishwasher dish rack...

If the upper rack on your dishwasher has become difficult to slide in and out, you may need to replace the slide track. This genuine OEM part is for the right side of your appliance. The left or right...

If there is still water left in your dishwasher after it has finished running, there may be an issue with your drain pump. The pump is designed to remove water from the tub, and if that is not happeni...

Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.

Sold individually.

If your dishwasher has started leaking, there may be an issue with the door seal. This genuine OEM replacement part measures approximately 22 inches long and 2 inches wide. The seal is made of plastic...

The heater element is located in the bottom of the dishwasher. It is used to maintain the temperature of the water during the wash cycle and to dry the dishes afterwards. If your dishes are not coming...

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

If you need a new lower dishrack for your dishwasher, this is a genuine OEM replacement part. The rack is gray in color and is used to hold your dishes in place while the appliance is operating. Pleas...

This seal is attached to the inner cabinet to reduce noise.