Models > MDB8951AWQ10 > Instructions

MDB8951AWQ10 Maytag Dishwasher - Instructions

Jump to:

All Instructions for the MDB8951AWQ10
121 - 135 of 425
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
George from FREDERICK, MD
Parts Used:
W10280784
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced damaged dishwasher tray
Removed the old one....slid in the new one.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janet from STURGIS, KY
Parts Used:
WP6-918873
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replaced silverware basket. No problems!
Lifted out old silverware basket. Set new basket in. Took approximately 20 seconds.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from BLUE SPRINGS, MO
Parts Used:
WP6-917644, WP6-917642
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
WAS NOT GETTING DISHES CLEAN
UNSCREWED THE LOWER PART BY PLIERS AND HAND. COULDN'T UNDERSTAND WHY THE LOWER
PART WAS AVAILABLE BUT THE UPPER SPRAY ARM
WAS NO LONGER AVAILABLE WHEN THEY BOTH GO TOGETHER..
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Laura from Chester, NH
Parts Used:
WPW10275768
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door would not shut
Easy! Unscrewed panel, took off old latch, put on new. Took about five minutes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Francine from Bristol, CT
Parts Used:
WP6-917644
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Top wash arm kept falling off.
I had to remove the the old retainer from the old wash arm ,install it on the new arm by snapping it on then I snapped the arm with the retainer up top of dishwasher.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lane from ITASCA, IL
Parts Used:
WP99003149
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replaced wheel on rack
Snapped new wheel on
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lance from Duvall, WA
Parts Used:
99002624
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
old wash arm was cracked and had gunk in it.
The upper arm assembly removes easily by unsnapping a plastic part or two that holds it in place.
Once the arm assembly is removed, you simply remove the screw that holds the arm on, replace the arm, and replace the screw. The key thing here is that you need a "star drive". This is a screw driver or bit that has a star shaped end. I don't know what size it is.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Newington, CT
Parts Used:
WPW10275768
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Broken handle assembly.
Removed inside cover.
removed part.
disconnected switches.
plugged wires onto new part.
placed part in.
put inside cover on and screwed down.
Note: be careful of the bottom of the inside cover.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from san diego, CA
Parts Used:
WPW10275768
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Dishwasher door stuck closed
After only 2 years, the Amana dishwasher door began to stick severely. If finally stuck so bad that I had to break the handle to get the door open. The replacement latch and handle fit perfectly and it only took a few minutes to get the screws off of the inner door panel to access the broken latch.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phil from Effingham, IL
Parts Used:
WP6-918873
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Basket got holes stuff fall throo
da basket don't come with rections so you gota figer it out yor sef. I tride pullen the handle off and it work then I tride pushen it on the other basket and it work to. Then i tride swapen dem and it work so thats how ya doit
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dan from Franklin, WI
Parts Used:
WP6-917644
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dishwasher arm keeps falling off.
I bought 2 Maytag appliances, a microwave and a dishwasher - they are both crappy!

The top plastic spray arm kept falling off into the top shelf of the dishwasher, causing all of the glasses on that shelf to come out dirty.

The arm has a small bracket that can snap off and on the main water tube easily without tools.

Changing it was a snap!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Croton on Hudson, NY
Parts Used:
WPW10275768
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Latch handle broke, making it hard to open the door.
Removed ~12 screws holding the inside liner onto the door. Pulled off the two connectors (one with black and one with white wires). Replace the handle and latch mechanism. Redid connections and replaced screws. Viola. (Be sure to buy BOTH the handle and latch mechanism- I don't see how you could easily install the handle on the mechanism myself, and what broken in my case was the black handle).
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Solon, IA
Parts Used:
WPW10275768
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Broken Door Latch
Ensure to order part # PS1559543, which is the complete assembly although the diagram doesn't show this, and not PS2100626 which doesn't include the handle. The new assembly is a different style than the original therefore you should replace the complete assembly.

This was an easy fix. Remove the eleven torque screws on the door and separate the inner door panel enough to remove the old assembly. Remove the wire connections from the door switches, reconnect to the new assembly, and reinstall the assembly and inner door panel.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
karen from escondido, CA
Parts Used:
WPW10275768
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
broken handle
First I removed the screws from the inside of the door exposing the latch assembly. Removed the old part and installed the new assembly. Don't screw it on to the door untill the cover is on again.
First I ordered only the latch without the handle. Found after opening it up the handle was broken on the inside so had to order the assembly. It's a piece of cake to install. If you're having touble opening the door don't think because the handle looks ok from the outside it's not broken.. probably is. Partselect.com is the greatest company to deal with. I'd recommend them to anyone and have.
Sam
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles from Glenwood Springs, CO
Parts Used:
WP6-918873
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
bottom of basket broken
take handle off old basket put on new basket done
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MDB8951AWQ10
121 - 135 of 425