MDB9150AWW Maytag Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from Houston, TX
- Parts Used:
- WP99002073, WP99002072
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Right side roller of upper basket kept coming off track because one of the 2 wheels was broken which came with the replacement strip. The plate was also broken and replaced to hold the strip in place. Easy fix.
Simply took old parts off and replaced them with new parts - no tools required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Fort Myers, FL
- Parts Used:
- WP6-918873
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old basket seperated on the bottom.
Removed the handle from the old basket and put it onto the new basket. The new basket is great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Phyllis Van from LODI, WI
- Parts Used:
- WPW10116811
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
old spray arm broke
held spray arm to arm connector and replaced snap retainer, works like a new machine
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from STURGIS, KY
- Parts Used:
- WP6-918873
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Replaced silverware basket. No problems!
Lifted out old silverware basket. Set new basket in. Took approximately 20 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeff from BURLINGTON, WI
- Parts Used:
- WP903093
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Wheel axle had broke and the wheel was not connected.
Actually following the online video is the way to go.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from MILPITAS, CA
- Parts Used:
- WPW10116811
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
upper spray arm won't stay attached to dishwasher ceiling
remove damaged retainer clip. Install new one. Note: the upper spray arm screws onto the ceiling of the dishwasher with a reverse thread. That is, you need to turn it counter-clockwise to tighten it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lane from ITASCA, IL
- Parts Used:
- WP99003149
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Replaced wheel on rack
Snapped new wheel on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Ashland, MA
- Parts Used:
- 99001454
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Upper rack rusted with many missing tines.
Remove the old rack and slip in the new one. Took 5 min to figure out how to remove the upper rack. Now have "new" dishwasher. Great service by PartSelect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonnie from Kenner, LA
- Parts Used:
- WP99001788
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishes not getting clean
I asked my husband if I ordered the parts would he change them for me, and when they arrived, it looked so simple I did it myself. I removed the washer arm by unscrewing the disk that holds it in place. I took the metal heat deflectors off the old arm (they just easily pried off) and put them on the new. I lifted off the large round "plate" that the arm rests on and cleaned the underside. Then put it back together in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from katy, TX
- Parts Used:
- WP99002837
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
the door handle broke
I removed 6 screws and the door face came loose.I removed the old handle ,then the new one snaped in .re installed the screws and i was done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brandon from Mesa, AZ
- Parts Used:
- WP99001788
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher door leaking severely
I decided to do some regular maintenance on the dishwasher. The spray arm and components have been caked from our hard water and soap. I unwittingly broke the seal on a portion of the spray arm to try and clean. I did not know it was sealed, thought it could snap. The broken seal created a high pressure stream that pushed the door enough to let water leak out.
Replacing it was easy. Unscrewed the plastic nut, lifted out spray arm and disc, unsnapped arm from disc and replaced new one. Leak is now fixed. This part was much much cheaper than i imagined and brought new life to our dishwasher. Best.Store.Ever.
Replacing it was easy. Unscrewed the plastic nut, lifted out spray arm and disc, unsnapped arm from disc and replaced new one. Leak is now fixed. This part was much much cheaper than i imagined and brought new life to our dishwasher. Best.Store.Ever.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from Holt, MI
- Parts Used:
- WP99002072
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Upper rack falling out of slide rail
No Tools Required! unclip the end caps of the slide rails, slide the upper rack out of the dishwasher. Remove the broken Wheel Mounting Strip from the rack and replace with the new unit. Re-assemble the rack into the dishwasher and re-fasten the end caps. Don't forget to get the appropriate accolades from your spouse!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Merton from Littleton, CO
- Parts Used:
- WP99002837
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door Latch Handle Broke in half and would not latch.
Actually, I did two repairs:
1) Ordered SUB 12002218 (Front Bowl Tine with Sleeves), part #9. Received it in the mail and made the repair in about five minutes. Then the next day the handle broke, which is repair 2.
2)Unscrewed all screws around the stainless doors (10 screws), then gently pulled up on the stainless plate at the point of the door latch. Pulled the old latch out, placed the new one in, then replaced the stainless cover and screws and it works good as new. These two repairs saved hundreds of dollars in repair costs by repair people.
1) Ordered SUB 12002218 (Front Bowl Tine with Sleeves), part #9. Received it in the mail and made the repair in about five minutes. Then the next day the handle broke, which is repair 2.
2)Unscrewed all screws around the stainless doors (10 screws), then gently pulled up on the stainless plate at the point of the door latch. Pulled the old latch out, placed the new one in, then replaced the stainless cover and screws and it works good as new. These two repairs saved hundreds of dollars in repair costs by repair people.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Mission Viejo, CA
- Parts Used:
- WP99002138, WPW10116789, WPY912709, WP99002137
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old parts had worn out
Replaced and repaired in less than five minutes using No tools
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from atkinson, NH
- Parts Used:
- WP99001443, 99001442, 99001426
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
hole in spray diverter
just put the three parts together . I had the old parts to go by .
You have a terrific web site for research into exact parts needed for any appliance Keep up the good work !
You have a terrific web site for research into exact parts needed for any appliance Keep up the good work !
Was this instruction helpful to you?
Thank you for voting!