MDB6601AWS Maytag Dishwasher - Parts

This kit includes the black plastic handle (white handle is no longer available from the manufacturer), the latch, and two switches. The door handle and latch assembly is a simple on/off mechanism tha...

This is a genuine OEM replacement silverware basket for your dishwasher. It is gray in color and comes as an assembly with a hinged cover and a handle. The basket sits in the front of the bottom rack ...

The rollers on the lower rack in your dishwasher allow the rack to smoothly roll in and out of the appliance. If a roller wheel has become damaged or broken off, it should be replaced so that the rack...

The fold away tine pivot or clip holds the tine rows in place. This part is made of gray plastic and is approximately 3 and a half inches in length. Some dishwasher models will have fold away tine row...

This is the door latch and switches only. The handle is not included with this part.

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

This is an inner door foam insulation strip for your dishwasher. This part is also known as the foam seal. It creates a waterproof seal to prevent leaking from your appliance. Before installing the ne...

This is the replacement convertible tine pivot for your dishwasher. It is made of gray plastic and is approximately 4 inches long and 1 inch wide. The convertible tine pivot allows the tine row to eit...

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

This wheel attaches to the inside of the tub to help guide the track and support the top rack.