Models > MDB7959SHZ0 > Instructions

MDB7959SHZ0 Maytag Dishwasher - Instructions

Jump to:

All Instructions for the MDB7959SHZ0
121 - 135 of 454
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
michael from LUMBERTON, TX
Parts Used:
WPW10327249
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
No water flow to dishwasher
Removed lower kick panel and there it was on the left hand side. Removed the waterline and removed the mounting screws. Disconnected the inlet waterline into the dishwasher. Removed the bad inlet valve and replaced in reverse order.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
edward from sullivan, OH
Parts Used:
8194001
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door of the dishwaher banged open
Pulled the dishwasher out and took the two door balance links off and put the new ones on and attached to the spring. It was very quick and easy
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joel from ROLLA, MO
Parts Used:
WP8269145
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
installer from lowes di not do it right, forgot to put scew in, instead he used shims, as usuall no more installs from Lowes
followed directions, a kid could have done it,
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from TRES PINOS, CA
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Two wheels on the lower rack kept falling off.
Very, Very easy - watched the Installation Video highlighted on web page and the entire process took less than 5 minutes!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from CANTON, MA
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken wheel
Easy. Just watched video.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from FRAMINGHAM, MA
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Wheel came off. Hub that held the wheel to the assembly got burned by heater.
Look at the way that 3 remaining Wheel Assemblies were attached to rack, Then pop off the offending assembly and attach the new one. Less than 5 minutes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from LEVITTOWN, PA
Parts Used:
WP302868
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Lost Screws from lower access covers for my Dishwasher
Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
G from BISMARCK, ND
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
A wheel on the lower dish rack wheel assembly broke off.
Pry the old wheel assembly and snap the new one in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from ELGIN, IL
Parts Used:
8194001
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Squeaky dishwasher door
Just like the video; remove the 2 nuts off the kick plate, remove the 2 screws under the counter, pull the unit out, ease the spring off the cable, nut drive the pully assembly's off, install the new ones, place new rope/cable from the door arms onto pullys, attach the spring, push the unit back into place, replace screws and the kick plate. Took 15 minutes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from WEST NEWFIELD, ME
Parts Used:
8194001
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
spring cable end broke
followed your very well done video clip exactly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JIMMY from ST GEORGE ISL, FL
Parts Used:
8194001
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
cord on balance mechanism broke.
pulled it out, saw 'pulley' was fine, and put cord on spring and puled it enough to hook it on other end.end after running cord around the 2 pulleys, as it was on the other side. push it back and done.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from LONGVIEW, TX
Parts Used:
8194001
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
The dishwasher door wouldn't hold in any position but went all of the way open.
You said the repair was easy and would take around 5 minutes to perform. You were spot on and the instructional video really helped do the job.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BARBARA from MAPLE HEIGHTS, OH
Parts Used:
W10861219
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Silverware basket falling apart
took the old basket out and put the new one in
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from Drexel Hill, PA
Parts Used:
W11177741
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Original door seal came out while emptying dishwaher. It was pretty messy so i ordered a new one.
I just followed the directions on the video that was part of the pictures for the door seal. I made sure that the channel was clean and the new seal pressed right in. i wish I had checked this site before I called a repairman, who wanted to charge me over $400 for a new one.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lawrence from COGAN STATION, PA
Parts Used:
8194001
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Door would just fall open
Followed directions here. Extremely easy repair.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MDB7959SHZ0
121 - 135 of 454