LDF5545ST (00) LG Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mike from GAHANNA, OH
- Parts Used:
- AGL75172632
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Control Panel lights started flashing like a lightswitch rave, dishwasher stopped working
This is apparently a widely known issue for LG, and since their call center was closed due to Coronavirus, I had no luck getting them to cover the repair. Not wanting to wait weeks of months for them to get off their duffs, I ordered the part and unscrewed the six screws holding the control panel on and unplugged the old part, plugged in the new part, and replaced the screws.
Works great now.
Works great now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from BOX SPRINGS, GA
- Parts Used:
- EBF64375202, 4681ED3001D
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Wrench (Adjustable)
Dishwasher would stop during the cycle with nE code
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwasher. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lenny from KIRTLAND, OH
- Parts Used:
- 4581DD3003C
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christopher from E BRUNSWICK, NJ
- Parts Used:
- AGL75172632
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
LG control panel malfunction - Control Lock error keeps going, buttons work inconsistent
Turn off power to the system - turn breaker off or unplug. Open the door. Remove the six screws at the top. Disconnect the control panel. Connect the new panel. Restore power. Test that buttons work. Replace the screws. Very easy DIY that will save you on calling for repairs. Part came fast, easy to install. 5-10 min tops.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nicholas from NEWNAN, GA
- Parts Used:
- AGL75172632
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Erratic Dishwasher, no lights, sometimes lightshow, sometimes works
Turn off power via breaker, remove 6 screws, unplug old control panel, plug in new panel, put screws back in. Very easy. All screws are accessible with the door open.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from FORT WORTH, TX
- Parts Used:
- AGL75172632
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Remove and Replace the Control Panel
Ordered the part after reading your web site about others having the same problem and that the new panel solved the problem. The panel is attached by six easy-to-remove screws. The only difficulty was with the electrical connector. The connector has a release tab you need to depress to disconnect, and the tab is not easily visible as it is on the on the back side as you hold the connector. Once I found the tab, the connector disconnected easily and also connected easily with the new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RICHARD from MURRIETA, CA
- Parts Used:
- 4620ED3001C
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
BOTTOM TRAY OF DISHWASHER WOULD SLIDE ALL THE WAY OUT WITH NO STOP
Was not able to see where the Stopper, Rollers ( Part # PS3523062) could be attached to the back of the bottom tray, to fix the problem. So the parts were useless.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from YONKERS, NY
- Parts Used:
- MEG64438801
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
to change the clip that holds the the upper rack the whole rail must be changed
you need to carefully apply a little pressure to the rail moving it back towards the back of the tub, this will let it unhook from the tub, then just slide the new rail into place.
Was this instruction helpful to you?
Thank you for voting!