Models > LDF5545SS > Instructions

LDF5545SS (ASSESNA) LG Dishwasher - Instructions

Jump to:

All Instructions for the LDF5545SS
16 - 23 of 23
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Nicholas from NEWNAN, GA
Parts Used:
AGL75172632
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Erratic Dishwasher, no lights, sometimes lightshow, sometimes works
Turn off power via breaker, remove 6 screws, unplug old control panel, plug in new panel, put screws back in. Very easy. All screws are accessible with the door open.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timothy from SUSANVILLE, CA
Parts Used:
4581DD3003C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
lost old wheel
snapped on new axel-wheel assembly
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
michael from Indian Land, SC
Parts Used:
MEG64438901, MEG64438801
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Adjustable racks
Took a picture of damaged part and searched internet. Found exact match at partsselect.com. Received parts in a reasonable amount of time. Snapped parts into place. Job complete.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Russ from Cayucos, CA
Parts Used:
MGR62762103, AHB73249104
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The oem dishwasher racks were badly rusted. There's no cathodic protection provided for the dishwasher internals and the plastic coating on the racks was inferior.
The replacement racks fit perfectly and my wife doesn't use the vertical adjustment feature on the top rack so I didn't need to transfer it from the old rusted rack to the new one.
When I cleaned the filter there was alot of rust flakes. I'm thinking about pitting a rare earth super magnet in the filter basket to keep the flakes away from the water pump impellar and pump seals. I also created a corrosion anode by wrapping aluminum foil around a tennis ball and putting it in the rack utensils holder. When the foil turns black I replace it.

Thanks partselect to the MAX.
Lower rack AHB73249104.
Upper Rack MGR62762103
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from YONKERS, NY
Parts Used:
MEG64438801
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
to change the clip that holds the the upper rack the whole rail must be changed
you need to carefully apply a little pressure to the rail moving it back towards the back of the tub, this will let it unhook from the tub, then just slide the new rail into place.
7 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Leo, IN
Parts Used:
4581DD3003C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Broken Roller On The Lower Tray.
These were a simple snap on item. It took longer to carry the parts from the porch that to install. Recently purchased house. Rollers were missing due to overload?? Removed the remaining roller pieces. Cleaned and straightened the axle shafts, spray lubed the tray and snapped the new pieces in place.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RICHARD from MURRIETA, CA
Parts Used:
4620ED3001C
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
BOTTOM TRAY OF DISHWASHER WOULD SLIDE ALL THE WAY OUT WITH NO STOP
Was not able to see where the Stopper, Rollers ( Part # PS3523062) could be attached to the back of the bottom tray, to fix the problem. So the parts were useless.
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LDF5545SS
16 - 23 of 23