KUDE70FXBL6 KitchenAid Dishwasher - Parts

Sold individually. Used with the heating element.

The heater element is located in the bottom of the dishwasher. It is used to maintain the temperature of the water during the wash cycle and to dry the dishes afterwards. If your dishes are not coming...

This gray lower dishrack fits select Whirlpool, KitchenAid, Maytag, and other compatible dishwashers. It holds dishes securely during wash cycles and is ideal for replacing racks that are damaged or r...

This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

If your dishwasher has started leaking, there may be an issue with the door seal. This genuine OEM replacement part measures approximately 22 inches long and 2 inches wide. The seal is made of plastic...

This genuine OEM filter is found under the lower spray arm in the bottom of your dishwasher. It is used to trap debris and prevent it from entering the pump. If your dishes are not properly cleaned or...

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

This seal is attached to the inner cabinet to reduce noise.

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...

This drain hose is 6 and 1/2 feet.

This tine row is for the top rack of your dishwasher, and prevents cups, dishes, and other items from moving around during the cycle. If your current row is missing one or more tines, or the tines hav...

This door latch secures the dishwasher door and signals the control board when closed, allowing the cycle to begin. If the door won’t latch or the dishwasher won’t start, the latch may be faulty. Comp...