Models > KUDP220T5 > Instructions

KUDP220T5 KitchenAid Dishwasher - Instructions

Jump to:

All Instructions for the KUDP220T5
121 - 135 of 192
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Catherine from Twin Lakes, WI
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tube to the top rack that supplies water
The tube had holes from being used but the dishwasher still works great. I researched this part and it was a great price and really easy to fix. The picture looks different than what the tube looks like in the dishwasher but it is correct. Definitely put soap on the ends to help glide it on. Took me 2 minutes to fix.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from Madison, NJ
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Upper water tube had a leak
simply pieced together the "tube"
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Shirley from Tucson, AZ
Parts Used:
WP4162322, 4162321
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Rollers and axels were worn out.
Very easily!! I am 19 years old and repaired the dishwasher for my grandmother in about 15 minutes. Great products.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Winchester, MA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tude was disintegrating.
Removed old tube.

New tube was a little tight, so I heated it with a hair dryer and used dish washing detergent - Joy - as a lubricant. Then the tube slipped on easily.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MORTON from WOODBURY, NY
Parts Used:
4171544
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
not cleaning well
I placed the hose on one side after placing one end in boiling water. I placed the other end in the hot water and pushed it on.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LESLIE from SOUTH CHARLESTON, WV
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Water delivery tube disintegrated due to age
Removed the old tube with the aid of a knife to cut one end off the fitting. Then I lubed each end of the tube with dish washing soap and slipped them on. Done in 10 minutes. Easier to do if the top rack is removed for better access to the hose connections.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Downers Grove, IL
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The rubber water tube was worn out and the water was spraying everywhere inside the dishwasher
All I had to do was remove the damaged hose and replace it with the new hose. It took all of 5 minutes. The dishwasher is working like new!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Francis H. from New Brighton, PA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
old tube rotted away, top rack was no cleaning
took old tube of and heaten new tube to soften it. put some plumber grease on ends and slipped it on. longest time was boiling the water.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
douglas from stocholm, NJ
Parts Used:
WP9743413
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set
water not going into dishwasher
While replacing the water valve I broke the float switch. Ordered the switch....it was here in 2 days. Great service! Will use this company again....I hope not all that much. lol
I am a retired Sears service tech, but not a dishwaher tech.
Love Parts Select!
Thanks guys,
Doug
1 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
robert from coumbus, OH
Parts Used:
WP4162322, 4162321
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
broken roller weels on bottom dish rack
I simply removed the broken wheel brackets and snapped new ones on. then the wheel just sliped on. It took some good hand strength.
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Norman, OK
Parts Used:
WP4162568
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Detergent dispenser failed to open
Removed the door cover and replaced the bi-metal.
5 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from Duxbury, MA
Parts Used:
W10207863, WP8531743, WP9743413, 9743070
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Old float stem had fine thread new one had corse and did not supply nut so had to use old one over.
put new switch and new gasket on old float stem with old nut. but it still overflows about 1/2 cup of water through stem
10 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandi from Farmingville, NY
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Water did not leave dishwasher it also leaked on floor
Went very well. The repair tech had to pull out dishwasher, check for a clog drained the water out of dishwasher by pumping into a container. All good, not sure why it did not drain for me. Repair tech got it working. I am happy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BILL from LANCASTER, SC
Parts Used:
WP4162322, 4162321
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
bottom tray had come off
I took off all the old axils and put new ones on,and then I slide the wheels on and That was all is to it. EASY!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kyle from Lake City, PA
Parts Used:
4171544
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Moved, New Dishwasher tube was moldy
Cut the old tube off and slid the new tube on. Make sure that the hole in the center of the tube is down because it is a drain. Supper simple. Be careful not to force anything because the plastic parts of the dishwasher want to snap. And if its the same older model I fixed, the aged plastic will want to crack. Partselect.com did an awesome job at delivering a $10 part in 2-3 days. Will be back for more parts!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KUDP220T5
121 - 135 of 192