KUDI01TJBL0 KitchenAid Dishwasher - Parts

This part is located between the console and the door.

Screws NOT included.

The thermal fuse is not included on this part. As per the factory: This is a substituted part and should only have 3 terminals. The P4(Y) terminal has been removed.

This is a 13oz can of spray pan.

The overfill standpipe nut attaches the dishwasher float to the overfill standpipe

Also known as a feed tube.

Vent only. Gasket is NOT included. Must be ordered separately.

As per the factory, the hole for the thermistor should be 31-31.5mm. This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.