Models > KUDC210S2 > Instructions

KUDC210S2 KitchenAid Dishwasher - Instructions

Jump to:

All Instructions for the KUDC210S2
76 - 79 of 79
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dee from Bryn Mawr, PA
Parts Used:
WP4162322, 4162321
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Ordered axles to replace several originals which had broken.
The installation video is excellent. What should have been a simple fix proved to be difficult for me. Perhaps a function of not enough hand strength to "snap" the axles in place. After trying to use a screwdriver to pry open a side enough to slide on and soaking in hot water to make the axles more pliable -- neither of which worked -- I turned the rack on its side, inserted the axle in the opening and then stepped on it. Voila! That worked beautifully and the next two were easy using the "stand-on-it" method. For anyone with a similar issue as far as hand strength, I recommend this method.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terry from Pompano Beach, FL
Parts Used:
4171221
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing rinse dispenser cap
Sorry to say that all I did was screw the cap on in about 3 seconds. Not a repair.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nyleen from Penacook, NH
Parts Used:
WP4171000
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
No water filing
Took off front panel and removed the faulty part, installed the new one and started it up.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from Durham, NC
Parts Used:
WP9741251
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The left mounting bracket had broken..
I had called an appliance repairman...I gave him the model #- he called me back in 2 seconds and said it was too old.. no parts available.. wanted to charge me $100 to come and look.I found parts select online. the part came in one day... and my handy man/put the new bracket on.. the dishwasher was put in new in 1991 and still works like a charm..thanks thanks
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KUDC210S2
76 - 79 of 79